Products

AEROXIDE® Alu C Coatings is a fine-particle fumed aluminium oxide with high specific surface area and marked aggregate and agglomarate structure. The positive surface charge makes it ideal to control the electrostatic charge in powder coatings.

TEGO® Glide 432 shows very good slip and substrate wetting properties. It is highly recommended for radiation-curable coatings.

Rilsan® D50 NATURAL are specialty polyamide powders obtained from renewable resources. Rilsan® D50 NATURAL is used as additive in paint formulations to provide excellent scratch and abrasion resistance and a desired structural effect in a wide range of liquid systems, both water-borne and solvent-borne.

ACEMATT® HK 400 is an untreated, medium particle sized precipitated silica. It is especially recommended for pigmented systems.

CRAYVALLAC® WN-1535 is a micronised modified polypropylene wax designed as a matting agent for use in inks and liquid coatings while providing a smooth and silky feel appearance. It is especially designed for water-based systems where it shows ease of dispersability.

Bluesil™ EMUL 872RH is a general purpose, non-ionic, aqueous silicone emulsion.

TEGO® Rad 2250 (Spain) is a broadly usable radically cross-linkable slip agent for clear coats. It provides efficient wetting, slip, and flow combined with very good compatibility.

SUKOREZ® SU-500 is a hydrogenated water white C5/Cyclic hydrocarbon resin with softening point around 100°C. it can be used in hot melt PSAs and hot melt adhesives with good compatibility with SIS, EVA, polyolefins and etc. Especially, it can be used for applications where require good thermal stability in terms of color.

AERODISP® W 7520 NF is an aqueous dispersion of a hydrophilic fumed silica with an alkaline pH-value, which is recommended for food contact applications

HIKOTACK® P-120S is pale yellow thermoplastic resin obtained from polymerizing unsaturated aromatic olefins and diolefins derived from the process of thermal cracking of naphtha. The major usages are rubber compounding agent for tires, tubes, rubber coated clothes. And this grade also can be used as tackifier for Ethylene Vinyl Acetate (EVA) based hot melt adhesive (HMA), water repellent agent, concrete, curing agent and binder for asphalt.

DERTOLINE® G2L is a deodorized and stabilized glycerol rosin ester. It is a very light-colored tackifier resin particularly recommended for hot melt adhesives based on EVA styrene or block copolymers adhesive.

Dynasylan® SILBOND® Condensed is a clear, low-viscosity liquid with a minimum silica content of 28.0% (the Si content of Dynasylan® SILBOND® Condensed is calculated as SiO2 ). Dynasylan® SILBOND® Condensed is tetraethyl orthosilicate (TEOS; Si[OEt]4 ), and is used as a raw material for acid- or alkali- catalyzed hydrolysis and subsequent condensation reactions, commonly known as the sol-gel process. The gelation rate is dependent upon the concentration of water and the pH.

Dynasylan® 9896 is a surface modifier and functions as a surface modifier in CASE ingredients.

TEGO® Glide 406 is a solution of a polyether siloxane copolymer

SUKOREZ® SU-640 is water white cycloaliphatic hydrocarbon resin. The major usage are a modifier in blends with polymers for filmic application and tackifier for EVA, SIS, SEBS block copolymers, metallo- cene polyolefins and APAO.