Products

CYMEL® U-21-510 Resin is a partially n-butylated urea resin supplied in a mixture of n-butanol and xylene. It has excellent compatibility with epoxy resins. It is recommended in primer formulations which are to be topcoated and re-baked. Low viscosity and epoxy solution compatibility make this product an ideal modifier.

CARPOL® GP-1500 is a glycerin-initiated polyether polyol. The resulting material has a functionality of three and an average molecular weight of 1500 Da. This triol is polymerized solely with propylene oxide for controlled reactivity. Main applications include C.A.S.E., however, CARPOL® GP-1500 may also be included as a component in other urethane products and formulations.

WANNATE® HT-80BS is an aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) and dissolved in of 20% n-butyl acetate and solvent naphtha 100 (1:1), colorless to slightly yellowish clear liquid.

CARPOL® GP-6015-60 is a glycerine initiated polyether polyol. The resulting material has a functionality of three and an average molecular weight of 6000. This triol is polymerized with propylene oxide and then capped with 15% ethylene oxide. The outcome is a polyol with enhanced reactivity. Main applications include C.A.S.E., as this polyol has low total unsaturation levels and an anti-oxidant package taylored for this type of market.

RHOPLEX® VSR-1065C is an APEO (alkyl phenol ethoxylate) surfactant free1 100% acrylic binder with ambient cross-linking technology and specially engineered polymer architecture. RHOPLEX® VSR-1065C delivers exceptional performance in semigloss through flat formulations for both interior and exterior applications. Paint made with RHOPLEX® VSR-1065C Emulsion exhibits excellent stain removal, scrub resistance, film hardness, adhesion and exterior durability. RHOPLEX® VSR-1065C Emulsion offers paint formulators a versatile resin along with added benefits including low VOC capabilities without sacrificing early hot block resistance. RHOPLEX® VSR-1065C contains no intentionally added PFAS.

EBECRYL® 3720-TM20 is the bisphenol A epoxy diacrylate, EBECRYL 3720, diluted 20% by weight with the reactive diluent trimethylolpropane triacrylate (TMPTA)(1) to provide a lower viscosity, easier handling product. EBECRYL® 3720-TM20 exhibits fast cure response and light color. Films of EBECRYL 3720-TM20 cured by ultraviolet light (UV) or electron beam (EB) demonstrate high gloss and surface hardness, and excellent chemical resistance.

EBECRYL® 896 is a multifunctional monomer which polymerizes when exposed to sources of free radicals. It is composed primarily of the pentaacrylate and hexaacrylate esters of dipentaerythritol. EBECRYL® 896 is particularly useful in UV (ultraviolet) and EB (electron beam) curable inks and coatings where improved cure response, hardness and scratch/abrasion resistance are required.

CYMEL® 303 LF resin is a highly methylated, monomeric melamine crosslinker supplied in liquid form at ≥ 98% solids content. Its high extent of alkylation and low tendency to self-condense make CYMEL® 303 LF resin a highly effective crosslinking agent for a broad range of applications such as can, container, automotive and general industrial coatings. While CYMEL® 303 LF resin is insoluble in water, it shows excellent compatibility with water-soluble backbone polymers and provides very good stability in amine-stabilized waterborne formulations.

EBECRYL® 8311 is an aliphatic urethane acrylate nanocomposite that exhibits low viscosity and high reactivity in ultraviolet (UV) light or electron beam (EB) curable coatings. EBECRYL® 8311 can be easily incorporated into at any stage of formulating. Films of EBECRYL 8311 exhibit good weatherability, outstanding hardness, chemical, and scratch and abrasion resistance coupled with very low haze development after abrasion. EBECRYL® 8311is designed to be used as the main oligomer in formulations requiring a high degree of hardness, scratch, abrasion resistance and low development after abrasion

AEROTEX® IBMA Monomer a homolog of N-methylolacrylamide (NMA), is the isobutyl ether of NMA. It contains a readily polymerizable vinyl group as well as a crosslinkable iso-butoxymethyl group.

CYMEL® 301 Resin is a highly methylated melamine crosslinker supplied at >98% solids. Relative to CYMEL® 303 LF resin, CYMEL® 301 Resin is slightly higher in both monomer content and extent of alkylation resulting in a product with lower viscosity that exhibits fast cure response and imparts excellent flexibility to the film. Its high functionality and low tendency to self-condense makes CYMEL® 301 Resin suitable for a wide range of applications like can, container, automotive and general industrial coatings.

EBECRYL® 824 functions as a monomer and oligomer in CASE ingredients. It belongs to the chemical mixtures and blends family.

Dynasylan® MEMO is a methacrylfunctional silane that can be used as adhesion promoter, surface modifier, co-monomer for polymer synthesis and crosslinker. Dynasylan® MEMO is a clear, colorless liquid. It is soluble in alcohols, and aliphatic or aromatic hydrocarbons.

EBECRYL® 3720-HD20 is the bisphenol A epoxy diacrylate, EBECRYL 3720, diluted 20% by weight with the reactive diluent 1,6-hexanediol diacrylate (HDDA) to provide a lower viscosity, easier handling product. EBECRYL 3720-HD20 exhibits light color and fast cure response. Films of EBECRYL 3720-HD20 cured via ultraviolet light (UV) or electron beam (EB) demonstrate high gloss, surface hardness, and superior chemical resistance.

EBECRYL® 3200 is a blend of acrylated aliphatic and aromatic bisphenol A epoxy resins and exhibits relatively low viscosity and good wetting ability. Films of EBECRYL 3200 cured by ultraviolet light (UV) or electron beam (EB) possess high gloss, flexibility and chemical resistance.