Products

CARPOL® PGP-400 is a propylene glycol-initiated polyether polyol. CARPOL® PGP-400 has a nominal functionality of two and a molecular weight of 400 Da. The low functionality and viscosity of this polyol makes for a versatile product. It may be used in rigid foam systems to lower the viscosity of B-side materials while helping control crosslinking.

CARPOL® GP-4520-55 is a glycerin-initiated polyether polyol. The resulting material has a functionality of three and an average molecular weight of 4500 Da. This triol is polymerized with propylene oxide and then capped with 20% ethylene oxide. Main applications include C.A.S.E., however, CARPOL® GP-4520-55 may also be included as a component in other urethane products and formulations.

CARPOL® GP-725 is a glycerin-initiated polyether polyol. The resulting material has a functionality of three and an average molecular weight of 700 Da. This triol is polymerized with propylene oxide and then capped with 25% ethylene oxide. The outcome is a polyol with enhanced reactivity when compared to its counterpart CARPOL® GP-700. Main applications include C.A.S.E., however, CARPOL® GP-725 may also be included as a component in other urethane products and applications.

PTMEG-3000 is used in DIY consumer and industrial and assembly adhesives. It is compatible with polyamide, polyesters, and polyurethane substrates.

CARPOL® PGP-2012 is a propylene glycol-initiated polyether polyol. CARPOL® PGP-2012 has a functionality of two and an average molecular weight of 2000 Da. This diol is polymerized with propylene oxide and then capped with 12% ethylene oxide. The outcome is a polyol with enhanced reactivity when compared to its counterpart CARPOL® PGP-2000.

CARPOL® GP-1000-60 Polyolis a glycerin-initiated polyether polyol. The resulting material has a functionality of three and an average molecular weight of 1000 Da. This triol is polymerized solely with propylene oxide for controlled reactivity. Main applications include C.A.S.E., however, CARPOL® GP-1000-60 Polyol may also be included as a component in other urethane products and formulations.

CARPOL® PGP-4000 is a propylene glycol-initiated polyether polyol. The resulting material has a functionality of two and an average molecular weight of 4000 Da. This diol is polymerized solely with propylene oxide for controlled reactivity. Main applications include C.A.S.E., however, CARPOL® PGP-4000 may also be included as a component in other urethane products and formulations.

POLYMEG® 2000 is used in polymer manufacturing and is applied in industrial and assembly adhesives.

CARPOL® PGP-400-50 is a propylene glycol-initiated polyether polyol. The resulting material has a nominal functionality of two and a molecular weight of 400 Da. The low functionality and viscosity of this polyol makes for a versatile product. It may be used in rigid foam systems to lower the viscosity of B-side materials while helping control crosslinking.

CARPOL® GP-700 is a glycerin-initiated polyether polyol. The resulting material has a functionality of three and an average molecular weight of 700 Da. This triol is polymerized solely with propylene oxide for controlled reactivity. Main applications include C.A.S.E. and flexible foam, however, CARPOL® GP-700 may also be included as a component in other urethane products and formulations.

CARPOL® GP-1000 is a glycerin-initiated polyether polyol. The resulting material has a functionality of three and an average molecular weight of 1000 Da. This triol is polymerized solely with propylene oxide for controlled reactivity. Main applications include C.A.S.E., however, CARPOL® GP-1000 may also be included as a component in other urethane products and formulations.

WANNATE® HMP-100 is a aliphatic diisocyanate prepolymer based on polypropylene ether glycol. It is a colorless or pale yellow liquid with low viscosity and characteristic odor.

PTMEG-1800 is used in industrial and assembly adhesives and is compatible with polyamide, polyesters, and polyurethane substrates.