Products

OREVAC® 18334 is a maleic anhydride grafted linear low density polyethylene.

DERTOPHENE® T 105 is a light-colored and low VOC terpene phenolic resin. It allows to improve the properties of hot melt or solvent based adhesives such as specific adhesion, hot tack or flexibility.

DERTOPHENE® T is a light-colored and low VOC terpene phenolic resin compatible with acrylics, various elastomers and waxs. It allows to improve the performance of hot melt and solvent based adhesives such as specific adhesion and tack.

OREVAC® 18211 is a coextrusion adhesive resin based on maleic on a maleic anhydride modified ethylene vinyl acetate copolymer.

OREVAC® 18725N is a polypropylene based adhesive resin for extrusion and thermo- lamination processes. Available in pellet form, it can be processed on most polyolefin extrusion or coextrusion equipments.

OREVAC® 18729 is a maleic anhydride grafted polypropylene.

PLATAMID® HX 2544 is a standard thermoplastic copolyamide hot melt adhesive available in pellet form. This very low melt viscosity grade is particularly suitable for manufacturing webs, nets, mono and multi filaments, and films by extrusion.

NANOPOL® C 784 shows the highest performance in scratch and abrasion resistance without influencing the gloss or transparency of the coating.

HIKOTACK® P-150 is pale yellow thermoplastic resin obtained from polymerizing unsaturated aromatic olefins and diolefins derived from the process of thermal cracking of naphtha. The major usages are vehicle for ink. HIKOTACK® P-150 shows superior compatibility with rosin modified phenolic resin, so it can be used with phenolic resin in off-set ink to decrease the set time and increase the gloss.

RESIDHERE FD 80 FLAKE is modified gum rosin without tendency to crystallization.

PARALOID™ AU-608S Resin are acrylic polyols specifically designed to produce hard, resistant, durable coatings when reacted with aliphatic isocyanates. The exceptional properties of these coatings have led to increased use in such heavy duty maintenance applications as chemical plant storage tanks and offshore rigs and platforms.

PARALOID™ B-44S 40% Resin is specified for PVDF coil coatings and can be blended with other PARALOIDTM resins to adjust the balance of properties required for a particular application, such as color/base coats for metal substrates. It is supplied as a 40% solution in toluene and is also available in a solid grade (PARALOIDTM B-44 Solid Grade Thermoplastic Acrylic Resin).

PARALOID™ A-21 30% Resin is a very hard methyl methacrylate type polymer with enhanced adhesion properties. It is provided as a 30% solution in a toluene/butanol system. The polymer is also available in a solid grade form. Lacquers formulated with PARALOID™ A-21 30% Resin possess excellent intercoat adhesion, hardness, and outdoor durability. PARALOID™ A-21 30% Resin will air-dry rapidly to give clear, colorless films that have excellent resistance to yellowing.

PARALOID™ A-21LV 30% Resin is a very hard methyl methacrylate polymer with enhanced adhesion properties. It is supplied as a 30% solution in a toluene/MEK/butanol solvent system. The polymer is also available in solid grade form. PARALOID™ A-21LV 30% Resin is similar to PARALOID™ A-21LV 30% Resin in characteristics and uses but because of its solvent system, PARALOID™ A-21LV 30% Resin possesses better compatibility with cellulosics, such as nitrocellulose and cellulose acetate butyrate. PARALOID™ A-21LV 30% Resin also will allow a higher solids content at spray viscosity.

SUKOREZ® SU-525 is water white cycloaliphatic hydrocarbon resin. The major usage is a tackifier for EVA, SIS, SEBS block copolymers, metallocene polyolefins and APAO.