PLATAMID® HX 2544

PLATAMID® HX 2544 is a standard thermoplastic copolyamide hot melt adhesive available in pellet form. This very low melt viscosity grade is particularly suitable for manufacturing webs, nets, mono- and multi-filaments, and films by extrusion.

Principal: Arkema High Performance Polymers

Chemical Family: Polyamides

End Uses: Film, Hot Melt Adhesive, Hot Melt Coating, Monofilaments, Multifilaments

Processing Methods: Extrusion

Features: Low Melt Viscosity, Multi-Substrate Adhesion

BrochureSafety Data SheetTechnical Data Sheet
  • TypeDocument Name
View All Documents

Enhanced TDS

Identification & Functionality

Blend
No
CASE Ingredients Functions
Binder & Resin
Chemical Family
Polyamides
Country of Origin
China
Plastics & Elastomers Functions
Resin
Product Code
MITM01797
Single Ingredient
Yes
Technologies
CASE,
Plastics
Product Families
CASE — Resins & Binders
Other Resins & Binders
Plastics — Engineering & Specialty Polymers
Polyamides

Features & Benefits

CASE Ingredients Features
Low Melt Viscosity,
Multi-Substrate Adhesion
Materials Features
Good Adhesion,
Low Melt Viscosity
Product Benefits

Platamid® HX 2544 offers a good adhesion at low fusing conditions to various polar substrates (thermoplastics,thermosets, metal natural fibers, etc).

Applications & Uses

Adhesive & Sealant End Applications
Hot Melt Adhesive
Coating End Applications
Hot Melt Coating
Plastics & Elastomers End Uses
Film,
Monofilaments,
Multifilaments
Plastics & Elastomers Processing Methods
Extrusion
Markets
Printing & Packaging,
Industrial
Applications
Printing & Packaging — Packaging
Other Packaging Materials
Industrial — Leather & Textiles
Technical Fabrics

Properties

Physical Form
Pellets
Soluble In
Benzyl Alcohol Soluble,
Formic Acid,
Meta-cresol Soluble,
Phenol Soluble,
Sulfuric Acid Soluble

Packaging & Availability

Packaging Type
Bags

Principal Information

Group Principal Number
S000003
Principal
Arkema High Performance Polymers

Other

Color (SDS)
Translucent
Item Number
ITM12645
Odor (SDS)
Odorless
Other Hazards
Processing may release vapors and/or fumes which cause eye, skin and respiratory tract irritation. For research and development use only by technically qualified individuals under section 5(h)(3) of the Toxic Substances Control Act, Contains high molecular weight polymer(s). Effects due to processing releases or residual monomer: Irritating to eyes, respiratory system and skin. Data for residual monomer:, Prolonged or repeated exposure may cause: convulsions, dermatitis, drowsiness, drying of skin, headache, local irritation, loss of consciousness, nausea, nosebleeds, weakness, (severity of effects depends on extent of exposure), This product may release fume and/or vapor of variable composition depending on processing time and temperature.
USA/DOT UN Number
Not Applicable
Shelf Life & Stability
ValueUnitsTest Method / Conditions
Shelf Life2.0 yryr
Physical Properties
ValueUnitsTest Method / Conditions
Density1.06 g/cm³g/cm³ISO 1183
Melt Volume-Flow Rate104.0 cc/10mincc/10minISO 1133 at 160°C, 2.16 kg
Melting Point95.0 °C°CISO 11357
Material Composition
ValueUnitsTest Method / Conditions
Renewable Carbon Content28.0 %%ASTM D6866
SDS Physical and Chemical Properties
ValueUnitsTest Method / Conditions
Autoignition Temperature (SDS)min. 878.0 °F°F
Decomposition Temperature (SDS)min. 446.0 °F°F
Density (SDS)1.1 g/cm³g/cm³at 68°F
Melting Point (SDS)194.0-212.0 °F°F
Solubility In Water (SDS)68.0 g/Lg/Lat 20°C