Products

EBECRYL® 4381 is a unsaturated polyester diluted with 30% dipropyleneglycol diacrylate (DPGDA)(1). Coatings based on EBECRYL® 4381 are characterized by good hardness and high gloss

EBECRYL® 876 is a polyester acrylate resin designed for use in UV/EB curable coating applications, in particular over-print varnishes (OPVs). EBECRYL 876 provides a bisphenol A (BPA) free alternative to epoxy acrylate based formulations while providing equivalent performance properties such as fast cure response, high gloss, hardness and excellent chemical resistance.

EBECRYL® 657 is a polyester tetraacrylate developed specifically for ultraviolet light (UV) and electron beam (EB) cured lithographic ink formulations. EBECRYL 657 provides the proper hydrophilic-lipophilic balance necessary for lithography, good pigment wetting, and low misting. It can be blended with epoxy acrylates or EBECRYL 436 or EBECRYL 438 to increase cure speed.

TEGO® AddBond 2325 improves flexibility and adhesion of solvent borne coatings. It is especially suitable for acrylic-based coating systems.

SILIKOFTAL® HTL 2/MPA is a methoxy-functional silicone polyester resin

SILIKOFTAL® HTF MPA/MBA is a methoxy-functional silicone polyester resin

EBECRYL® 571 is a diluted polyester resin for narrow web shrink sleeve applications. It exhibits excellent adhesion, high flexibility, and superb shrink performance. For optimum performance EBECRYL 571 should be the dominant resin in the heat shrink ink formulation. EBECRYL 571 contains dipropyleneglycol diacrylate (DPGDA)(1) monomer.

EBECRYL® 444 is a reactive chlorinated polyester resin diluted 40% with the reactive diluent propoxylated glycerol triacrylate (OTA-480) (1). EBECRYL® 444 is not based on bisphenol A raw materials, and is tin-free. It exhibits good lithographic behavior and pigment wetting properties, and fast cure response in ultraviolet light (UV) curable coatings and inks. Cured films of EBECRYL® 444 display good adhesion to metals, and paper.

TEGO® AddBond DS 1300 improves adhesion of water borne coatings on steel, galvanized steel, aluminum, and plastics.

TEGO® AddBond HS improves adhesion and flexibility of solvent borne coatings on steel, galvanized steel, aluminum, and plastics. It is highly suitable for high-solid coatings.

EBECRYL® 893 is a modified polyester acrylate specifically developed for UV curable field applied concrete and vinyl composition tile (VCT) floor coatings. EBECRYL 893 provides resistance to yellowing upon cure and over its lifetime. The low viscosity of EBECRYL 893 also provides latitude to achieve low viscosity formulations, which are required for field applied applications. Concrete and VCT coatings based on EBECRYL 893 provide a good balance of properties such as cure speed, adhesion, hardness, and scratch resistance. Good chemical and solvent resistance and high gloss are also obtained with concrete and VCT coatings based on EBECRYL 893.