Products

CARPOL® GP-4000-60 is a single-ingredient product belonging to the polyethers chemical family. It is identified as polyoxyalkylene triol.

CARPOL® PGP-4000 is a propylene glycol-initiated polyether polyol. The resulting material has a functionality of two and an average molecular weight of 4000 Da. This diol is polymerized solely with propylene oxide for controlled reactivity. Main applications include C.A.S.E., however, CARPOL® PGP-4000 may also be included as a component in other urethane products and formulations.

CARPOL® SPA-357 is a sucrose amine-initiated polyether polyol. The high functionality of the initiators yields a resultant polyol with a nominal functionality of 5.5 and a typical hydroxyl number of 350. This polyol’s functionality and short-chained nature make it optimal for use in rigid foam. In addition, CARPOL® SPA-357 contains amine and therefore is autocatalytic. This allows the formulator to use less catalyst while achieving the same reactivity seen in other neutral rigid polyols.

CARPOL® PGP-400-50 is a propylene glycol-initiated polyether polyol. The resulting material has a nominal functionality of two and a molecular weight of 400 Da. The low functionality and viscosity of this polyol makes for a versatile product. It may be used in rigid foam systems to lower the viscosity of B-side materials while helping control crosslinking.

CARPOL® GP-700 is a glycerin-initiated polyether polyol. The resulting material has a functionality of three and an average molecular weight of 700 Da. This triol is polymerized solely with propylene oxide for controlled reactivity. Main applications include C.A.S.E. and flexible foam, however, CARPOL® GP-700 may also be included as a component in other urethane products and formulations.

CARPOL® GSP-7216 is a glycerin-initiated polyether polyol formulated to a nominal functionality of 4.2 and a typical hydroxyl value of 31. This ethylene oxide capped polyol is designed to provide a moderate degree of cross-linking and reactivity for high resiliency flexible foam applications. Advantages of using this polyol include increased load bearing, enhanced compression set performance, and the potential for reduced use of graft polyol.

CARPOL® GP-1000 is a glycerin-initiated polyether polyol. The resulting material has a functionality of three and an average molecular weight of 1000 Da. This triol is polymerized solely with propylene oxide for controlled reactivity. Main applications include C.A.S.E., however, CARPOL® GP-1000 may also be included as a component in other urethane products and formulations.

AEROTEX® IBMA Monomer a homolog of N-methylolacrylamide (NMA), is the isobutyl ether of NMA. It contains a readily polymerizable vinyl group as well as a crosslinkable iso-butoxymethyl group.

Bluesil™ FLD 48 V20 000 is polydimethylsiloxane silicone oils with linears chains and reactive hydroxyl end groups.

Bluesil™ FLD 48 V6 000 is a polydimethylsiloxane silicone oils with linears chains and reactive hydroxyl endgroups.

Dynasylan® SIVO 250 is a methacrylfunctional silane that can be used as adhesion promoter, surface modifier, co-monomer for polymer synthesis and crosslinker. Dynasylan® SIVO 250 is a clear, colorless liquid. It is soluble in alcohols, and aliphatic or aromatic hydrocarbons.

Bluesil™ FLD 48 V750 is a polydimethylsiloxane silicone oils with linears chains and reactive hydroxyl end groups.

Bluesil™ FLD 48 V2 000 is a polydimethylsiloxane silicone oils with linears chains and reactive hydroxyl endgroups.

Bluesil™ FLD 48 V3 500 is a polydimethylsiloxane silicone oils with linears chains and reactive hydroxyl endgroups.

ONGRONAT® 3600 is a mixture of 4,4'-methylene diphenyl diisocyanate and 2,4-methylene diphenyl diisocyanate.