Products

CARPOL® PGP-2012 is a propylene glycol-initiated polyether polyol. CARPOL® PGP-2012 has a functionality of two and an average molecular weight of 2000 Da. This diol is polymerized with propylene oxide and then capped with 12% ethylene oxide. The outcome is a polyol with enhanced reactivity when compared to its counterpart CARPOL® PGP-2000.

Bluesil™ FLD 48 V750 is a polydimethylsiloxane silicone oils with linears chains and reactive hydroxyl end groups.

CARPOL® MX-470 is a Mannich-based polyether polyol. The resulting product has a nominal functionality of approximately four with a targeted hydroxyl number of 470. The presence of amine in this polyol creates a material that is autocatalytic. Due to this, CARPOL® MX-470 is suitable for spray foam in addition to any other application that demands a fast cure.

CARPOL® PGP-1000 is a propylene glycol-initiated polyether polyol. CARPOL® PGP-1000 has a functionality of two and an average molecular weight of 1000 Da. This diol is polymerized solely with propylene oxide for controlled reactivity. Main applications include C.A.S.E., however, CARPOL® PGP-1000 may also be included as a component in other urethane products and formulations.

DRY #1 Castor Oil is a Technical Grade pure castor oil having a very low moisture content at 0.02% maximum. Also known as ricinus oil, it is a triglyceride of fatty acids which occurs in the seed of the castor plant, Ricinus communis. The low moisture content makes this product ideal for lubricant or polyurethane applications where low moisture is required.

CARPOL® PGP-2000 is a propylene glycol-initiated polyether polyol. CARPOL® PGP-2000 has a functionality of two and an average molecular weight of 2000 Da. This diol is polymerized solely with propylene oxide for controlled reactivity.

AEROTEX® IBMA Monomer a homolog of N-methylolacrylamide (NMA), is the isobutyl ether of NMA. It contains a readily polymerizable vinyl group as well as a crosslinkable iso-butoxymethyl group.

CARPOL® PGP-4025 is a propylene glycol-initiated polyether polyol. The resulting material has a functionality of two and an average molecular weight of 4000 Da. This diol is polymerized with propylene oxide and then capped with 25% ethylene oxide. The outcome is a polyol with enhanced reactivity when compared to its counterpart CARPOL® PGP-4000. Main applications include C.A.S.E., however, CARPOL® PGP-4025 may also be included as a component in other urethane products and formulations.

Bluesil™ FLD 621 V10 000 is a α/ ω vinyl dimethylpolysiloxanes. They are available in viscosities from 20 mm²/s to 170 000 mm²/s. They are mainly used as base polymers for the production of silicone elastomers produced by a polyaddition crosslinking reaction, and as additives to modify organic polymer compounds.

Bluesil™ FLD 48 V2 000 is a polydimethylsiloxane silicone oils with linears chains and reactive hydroxyl endgroups.

CARPOL® GP-6305-55 Polyol is a glycerin-initiated polyether polyol. The resulting material has a functionality of three and an average molecular weight of 6300 Da. This triol is polymerized with propylene oxide and then capped with 5% ethylene oxide. The outcome is a polyol with enhanced reactivity. Main applications include C.A.S.E., however, CARPOL® GP-6305-55 Polyol may also be included as a component in other urethane products and formulations.

CARPOL® PGP-2000-60 initiated polyether polyol. CARPOL® PGP-2000-60 has a functionality of two and an average molecular weight of 2000. This diol is polymerized solely with propylene oxide for controlled reactivity.