Products

Focus RP 25C is a low foaming water soluble corrosion inhibitor. It is based on organic acids and is neutralized with amines. Designed for use in water based synthetic metalworking fluids and cleaners, Focus RP 25C is compatible with most synthetic water based metalworking additives, such as polyalkylene glycols.

Focus RP 45C is a low foaming, water-soluble corrosion inhibitor for use on cast iron and steel alloys. It has exceptional hard water stability, is based on organic acids and is neutralized with amines. Designed for use in water-based synthetic metalworking fluids, water-based hydraulic fluids and cleaners, Focus RP 45C is compatible with most synthetic water-based metalworking additives, like polyalkylene glycols, surfactants, pH builders, etc.

Focus Amide 5 is an oil-soluble, water-dispersible alkanolamide designed to enhance rust protection while serving as an excellent primary or secondary emulsifier. It is the ideal choice for adding lubricity or creating stable micro-emulsions. Additionally, Focus Amide 5 is highly effective in formulating emulsion cleaners, offering excellent hard water stability and minimal soap content for superior performance.

Pale 1000 Blown Castor Oil commonly known as blown oils have increasing viscosities resulting from oxidative and crosslink polymerization at the double bonds and hydroxyl groups. Oxidative polymerization of castor oil yields products with increased viscosities and decreasing solubility in aliphatic solvents, increasing compatibility with various resins and improved ability to wet and disperse pigments while imparting solvent and abrasion resistance to lacquer systems. The polymerized oils are used to plasticize a variety of resins in adhesive and sealant systems, inks and hot melts. The heavier viscosity polymerized oils are processing aids and plasticizers for rubber polymers, imparting oil and solvent resistance.

ZINC STEARATE TX PASTILLES are a low bulk density, very fine white powder.

Silcolapse® 454 is a compound containing polydimethylsiloxane oil and a mineral filler in colloidal dispersion. It is intended mainly for treating anhydrous media, but also aqueous media, in numerous industries (oil, crop protection products, detergents, chemicals, etc.). Its excellent behaviour in alkaline media and its efficiency in a wide range applications are of interest. Silcolapse® 454 is intended for industrial use only, and it should not be used in the manufacture of foodstuffs, cosmetics or pharmaceutical products.

Focus RP 12 is a water-soluble corrosion inhibitor designed for use in synthetic and semi-synthetic metalworking fluids and water-based cleaners. It is a boramide with a unique combination of amines, giving it a relatively high pH and reserve alkalinity. Focus RP 12 does not contain diethanolamine.

MARLOX® MO 124 is a fatty alcohol polyethylene glycol polypropylene glycol ether

ZINC STEARATE XM ULTRAFINE HYDENSE is a medium to low bulk density, fine white powder.

Focus Additive RP RZ8 is a very cost effective water-soluble corrosion inhibitor additive designed to impart temporary rust protection for ferrous and non-ferrous applications. It does not contribute to discoloration on the surface of non-ferrous metals. It imparts lubrication properties when used at higher concentrations. It is designed to have a relatively low pH and high acid content, which provides the ability to formulate fluid concentrates with a variety of alkaline sources. Focus Additive RP RZ8 is non-foaming and has excellent stability in hard water up to 1500 ppm hardness. Focus Additive RP RZ8 gives rust protection when water evaporates. The thin liquid film that remains provides rust protection to ferrous surfaces, even under high humidity conditions. This film can easily be removed by rinsing with water. It also burns off cleanly in high temperature processing operations. Focus Additive RP RZ8 is composed of a mixture of organic acid salts, is DEA free and can be waste treated by adjusting the pH below the methyl orange end point.

Silcolapse® 426R is a non-ionic aqueous emulsion based on polydimethylsiloxane oil. It has 30% active matter content and is recommended for the prevention, control or elimination of foam in aqueous systems.

ZINC STEARATE RSN VEG are high bulk density, granular powder.

Licocare® RBW 101 flakes VITA is a polar modified wax based on renewable resource.