Products

MARLOX® K 158 is a Alkyl polyethylene - polypropylene glycol ether

MARLOX® FK 57 is a Fatty alcohol alkoxylate, belongs to non-ionic surfactant.

MARLOX® FK 64 is a fatty alcohol polyethylene glycol polypropylene glycol ether

MARLOX® RT 64 is one of the many low-foaming EO/PO non-ionic surfactants produced by Sasol Chemicals in Germany. These alcohol alkoxylates are based on Sasol’s wide range of linear and semi-linear fatty alcohols. They are produced by alkoxylation of the fatty alcohols to varying degrees using ethylene oxide and propylene oxide. MARLOX RT 64 is a turbid liquid at room temperature and essentially 100% active.

NOVEL® 1216CO-7 Ethoxylate is a biodegradable nonionic based on a linear primary alcohol formulated to simulate that derived from coconut oil. ALFONIC 1216CO-7 Ethoxylate is liquid at room temperature, essentially 100% active and has the following structural formula: CH3(CH2)x(OCH2CH2)7OH where ‘x’ varies between 11 and 15. The narrow range version of this ethoxylate made using Sasol Chemicals patented NOVEL catalyst technology is also available.

Bluesil™ EMUL 284 is a slightly ionic oil-in-water type emulsion of a high viscosity a/w- hydroxydimethylpolysiloxane fluid. BLUESIL EMUL 284 is characterized by its reactivity, its outstanding stability, its lubricating power and its fabric softening properties (textile applications).

CARPOL® NIONIC™ L-61 Surfactant is a nonionic surfactant with a chemical structure designed to make it act as a defoamer in many applications. Even at very low concentrations, CARPOL® NIONIC™ L-61 can be used to reduce the superficial tension of liquids, including high viscosity liquids. Defoaming performance is a function of cloud point and end use temperature and CARPOL® NIONIC™ L-61 is our lowest foaming surfactant. These materials are water soluble at low temperatures and will flocculate when warmed above their cloud point.

Bluesil™ FLD 47 V30 000 (viscosities 30000) are dimethylpolysiloxane polymers with linear chains.

SURFONIC® LF-18 is an alkoxylated alcohol. This product is useful in many low foam applications such as rinse aids and mechanical dishwash formulations. It is also useful in formulating metal cleaning agents, semi-synthetic metalworking fluids, low foam acid cleaners and agricultural adjuvants. The product is dispersible in water and soluble in many organic solvents.

Bluesil™ FLD 47 V350 is straight chained polydimethylsiloxanic fluids.

HORDAPHOS MDB is an efficient EP/AW additive for aqueous metal working fluids and water-based fire-resistant hydraulic fluids (HFC, HFA-E).

RE:CHEMISTRY MOVE200 is a pure ester-based Solvent. 58% Biogenic Carbon (derived from agricultural waste) according to ASTM D6866-20. Readily biodegradable. Non-flammable, Non-combustible and Low volatile. Classified as Non-corrosive, Non-sensitizing and Non-toxic. Miscible in conventional organic solvents and water. Butyl Levulinate is a GRAS.

CARPOL® NIONIC™ 1400 Polyglycol is a nonionic surfactant with a chemical structure designed to make it act as a defoamer in many applications. Even at very low concentrations, CARPOL® Nionic™ 1400 can be used to reduce the superficial tension of liquids, including high viscosity liquids. Defoaming performance is a function of cloud point and end use temperature and CARPOL® NIONIC™ 1400 has a high cloud point of 77o C. These materials are water soluble at low temperatures and will flocculate when warmed above their cloud point.