Products

PC-1844™ Defoamer is a 40 % solution of an acrylic polymer in a petroleum solvent. It provides improved high temperature performance, and improved efficiency. PC-1844™ Defoamer is recommended for high performance usage where PC-1244, PC-1644, or silicone defoamers do not give adequate performance. These usages include gear oils, specialty lubricants, shock absorber, hydraulic, turbine and transmission oils. Typical use levels of the defoamer solutions range from 50 - 500 ppm (20 - 200 ppm active polymer). The optimum level is dependent upon the nature of the oil, and it is therefore necessary to run a concentration profile on each oil. PC-1844™ Defoamer defoamer is most typically employed at 200 - 250 ppm of solution (80 - 100 ppm active polymer). PC-1844 is without addition of silicon.

PC-3144® Defoamer is a 40 % solution of a modified acrylic polymer in a hydrocarbon solvent. It was developed to improve the defoamer stability performance for formulated synthetic and mineral based lubricants. It is especially recommended for PAO and PIB based synthetic lubricants, as well as the formulations containing these components, where conventional polyacrylate based defoamers do not work or do not work well.

PC-1244™ Defoamer is a solution of organic polymer in a petroleum solvent. It enhances air release properties and prevents foam formation in acidic or neutral organic fluids at temperatures up to 400 °F. It also performs in some alkaline systems. It has demonstrated an ability to retain its defoaming capacity over extended periods of time. It works without materially affecting the surface tension of the media. PC-1244™ Defoamercontains no silicone. PC-1244™ Defoamer applications include usage in gear oils, specialty lubricants, and hydraulic, turbine and transmission oils. Typical use levels range from 20 ppm to 2000 ppm (0.2 %) on active solids.

Emulsion A is an important component of emulsion type automotive and furniture polishes and cleaners that impart a durable, high lustre protective film. Water-based polishes are prepared by emulsifying the oil with alkalis and amines or non-ionic emulsifiers.

Focus RP 35 is a complex multifunctional ester containing high boron. It has excellent lubricating properties and also functions as a co-emulsifier and lubricity additive in both aqueous and oil-based systems. Due to the nature of molecule and high boron content, it can be used to formulate added bio-stability in soluble oils and semi-synthetic metalworking fluids.

Focus Nilfoam 180 is an economical general purpose defoamer. It is completely silicone-free. Although Focus Nilfoam 180 is a mineral oil based product, it is dispersible in water.

BONDERITE® L-AD GP 671 (Known as MOLYBDENUM DISULFIDE POWDERS) is a gray-black boundary lubricant powder that is thermally stable at temperatures to 2000°F (1093°C) in vacuum and 750°F (399°C) in air.

Additin® M 49.005 is a paraffin wax-based corrosion inhibitor, film former, lubricity additive, and wetting agent used in metalworking fluids, including cutting oils, drawing oils, machining oils, rolling oils, rust preventive oils, and stamping oils. It is bio-stable with low odor.

Additin® RC 4955 is a chemical blend used as an additive package for rust preventive oils. It is compatible with Group I and Group II base stocks and has a pH range of 6-8 (10% in water). The product provides excellent corrosion inhibition, emulsion stability, and good rust inhibition.

Additin® RC 3680 is an ashless anti-wear agent used in greases, hydraulic oils, metalworking fluids, and turbine & compressor fluids. It provides wear protection and offers good thermal stability and hydrolytic stability. The product is suitable for use in completion fluids, greases, hydraulic fluids, and metalworking fluids.

Focus Base P 20 is an emulsifier base with polyisobutylene succinic anhydride (PIBSA) as the primary emulsifier in place of natural and synthetic sodium sulfonate. It is designed for use in both paraffinic and naphthenic base oils.

Hatcol® 2910 is a pure adipate diester base stock containing medium chain branched alcohols. Hatcol® 2910 combines excellent high temperature oxidative stability with low temperature flow.

SpectraSyn Plus™ 4 provide an optimal combination of volatility and low-temperature fluidity. SpectraSyn Plus™ 4 Advanced PAO products viscosity indices translate into improved flow at low temperatures and increased film thickness at high temperatures. SpectraSyn Plus™ 4 Advanced PAO provide superior lubrication as the primary basestocks for synthetic lubricants used in passenger car engines, heavy-duty diesel engines, transmissions, and a variety of industrial applications. SpectraSyn Plus™ 4 Advanced PAO can be used for upgrading mineral oil or Group III basestocks for improved low temperature and volatility performance.

Additin® RC 8012 is a sulfurized fatty acid ester used as a lubricity additive, anti-wear agent, and friction modifier in gear oils, greases, hydraulic oils, and finishing fluids. It provides excellent lubricity, extreme pressure performance, friction reduction, and improved anti-wear properties. This product is also suitable for use in industrial additives, particularly in drilling muds.

Hatcol® 2938 is a pure polyol ester base stock based on trimethylolpropane which combines excellent high temperature oxidative and thermal stability with low temperature flow.