Products

Baling® YH-502T is a clear linear triblock copolymer based on styrene and ethylene/butylene, S-E/B-S, with bound styrene of 30%mass.

CARPOL® GSP-280 is a glycerin/sucrose-initiated polyether polyol. The high functionality of the initiators yields a resultant polyol with a functionality of seven and a typical hydroxyl value of 280. Due to this polyol’s functionality, its niche is rigid foam and its applications. Blending this polyol with other polyether polyols allows for foam systems with high to low degrees of crosslinking. In addition, CARPOL® GSP-280 is mildly catalytic, which enables the use of less catalyst while still providing the formulator with control over the system’s reactivity.

VPS SIVO 280 is a coupling agent, crosslinking agent, surface modifier, and trifunctional crosslinker used in coatings, adhesives, construction, marine, and wood applications.

TEGO® DISPers 690 is a polymeric highly efficient wetting and dispersing additive for solvent borne formulations. Especially suitable for solvent borne flexo inks, even NC-free inks. Wets and stabilizes organic pigments and carbon blacks.

SIPERNAT® 35 is a very finely milled, hydrophilic, slightly alkaline silica. SIPERNAT® represents a specific product range of precipitated silica, aluminium and calcium silicates.

CIMBAR 10 is barium sulfate, an inorganic pigment used as a filler and pigment in powder coating, battery expander, plastics, and elastomers applications.

D.E.R.® 350 is a modified Bisphenol F based liquid epoxy resin that has better resistance than unmodified bisphenol f based liquid epoxy resin to crystallization.

Sono Jell® Candle Base IV is petrolatum, a hydrocarbon used in fluids and lubricants, food and nutrition, healthcare and pharma, industrial, and personal care applications.

EBECRYL® 8501 is an aliphatic urethane acrylate designed for use in automotive refinish and general metal applications. Films of EBECRYL® 8501 exhibit a unique blend of flexibility and toughness coupled with good corrosion resistance. EBECRYL® 8501 contains isobornyl acrylate (IBOA)(1) as a reactive diluent.

HYDROGRAL® P is a pentaerythritol ester of partially hydrogenated rosin. It is specially recommended to improve oxidation resistance and long term adhesive performances of pressure sensitive adhesives.

TEGO® DISPers 752 W is an anionic wetting and dispersing additive for transparent iron oxides and transparent titanium dioxide in waterborne formulations. Provides outstanding transparency, high pigment loadings, and long-term stability, especially when used in binder-free dispersions.

Bluesil™ FLD 47 V30 000 (viscosities 30000) are dimethylpolysiloxane polymers with linear chains.

3M™ Boron Nitride Cooling Filler Flakes 200-3 is a engineered to improve thermal conductivity in polymers while maintaining or improving electrical insulation. Their unique properties make these additives suitable for many thermoplastic, elastomer and thermoset resins used in a wide variety of electrical and electronic applications including thermal interface materials (TIM), consumer electronics and automotive applications.