Products

SILIKOPHEN® P 80/X is a non reactive methyl phenyl silicone resin

CYMEL® MI-97-IX Resin is a partially iso-butylated melamine crosslinker supplied in a mixture of iso-butanol and xylene. Its fast drying behavior provides films with good early block resistance for stacking of parts and makes CYMEL® MI-97-IX Resin suitable for fast low temperature curing systems, like wood and paper coatings, providing very good film hardness, adhesion and appearance.

CYMEL® U-93-210 Resin is an n-butylated urea formaldehyde resin supplied in a mixture of n-butanol and xylene. It has excellent compatibility with epoxy resins and is recommended in primer formulations which are to be topcoated and rebaked.

HP9825 TOFA Short Oil Alkyd is a short oil, chain stopped alkyd resin based on tall oil fatty acid. It is formulated for air-dry enamels, spray paints, and baking enamels. It exhibits good overbake resistance (low yellowing)

CYMEL® U-662 resin is a partially iso-butylated urea crosslinker supplied in a mixture of iso-butanol and xylene. CYMEL® U-662 resin has high reactivity and a high tendency for self-condensation providing fast drying films with good gloss, hardness and block resistance. CYMEL® U-662 resin is an excellent crosslinker for acid curing wood coating applications where low formaldehyde emission is required.

CRAYVALLAC® PA3 XAF 20 is an alcohol-free pre-activated amide wax supplied in xylene. It is a rheology modifier in paste form with high efficiency (optimum sag resistance and viscosity).CRAYVALLAC® PA3 XAF 20 is supplied in the form of crystalline fibres. In a coating system, these fibres form an interacting network. This network gives rise to the shear thinning rheology of the final coating. This shear thinning characteristic provides a very high viscosity under the low shear rates associated with sedimentation, and a low viscosity at the much higher application shear rates. The net result is excellent control of sedimentation combined with ease of application.

CYMEL® 688 is a melamine formaldehyde resin, specifically butyl melamine formaldehyde, used in various industrial applications.

CRAYVALLAC® 60X is used in epoxies (EP) and vinyls. It is applied in anti-fouling coatings, chlorinated rubber coatings, primers, and solventborne coatings. The product provides anticaking, recoatability, and sag resistance.

CRAYVALLAC® PA3 X 20 is used in solventborne coatings, top coats, varnishes, and wood coatings. It is compatible with acrylics, alkyds, nitrocellulose, and polyurethanes (PU) and is suitable for wood substrates.

MARLOWET® 4588 functions as an emulsifier and hammer-finish agent used in solventborne and waterborne coatings.

CYMEL® 5010 Resin is a partially n-butylated benzoguanamine resin supplied in a mixture of n-butanol and xylene and designed for solvent-based coatings. Like other benzoguanamine resins, CYMEL® 5010 Resin imparts excellent adhesion and chemical resistance to the coating, but without the need for an external catalyst in the formulation. Because of the limited light resistance properties of benzoguanamine, CYMEL® 5010 Resin is not suitable for exterior applications.

CYMEL® U-227-8 Resin is a general-purpose n-butylated urea resin that combines fast curing speed with excellent enamel stability in pigmented systems. It is compatible with low and medium molecular weight epoxy resins and is recommended for use in epoxy/urea metal primers, metal decorating, and drum and dipping enamels. CYMEL® U-227-8 Resin is also recommended as a pigment grinding vehicle. It is supplied in a mixture of n-butanol and xylene.

CYMEL® U-1051 is a partially iso-butylated urea resin supplied in a mixture of iso-butanol and xylene. It has wide compatibility with other film formers and is useful in fast curing industrial baking finishes and low temperature curing conversion varnishes.

CYMEL® 27-802 resin is a general purpose partially n-butylated melamine resin supplied in a mixture of n-butanol and xylene . CYMEL® 27-802 combines fast curing speed with good resistance properties making it suitable for a wide variety of industrial bake finishes including decorative metal coatings

D.E.R.® 671-T75 Epoxy Resin Solution is a solid reaction product of epichlorohydrin and bisphenol A dissolved in toluene. D.E.R.® 671-T75 Epoxy Resin Solution is a low molecular weight epoxy resin of the “1-type” in an Aromatic 100 solution. Resin solutions such as this, when formulated with polyamine or polyamide hardeners, form an excellent base for many high quality coatings.