Products

D.E.H.® 802 is a polyamine adduct waterborne curing agent with optimized rheology specially designed to provide superior performance in roller applications. It can be used with liquid Bisphenol A and/or Bisphenol F epoxy resins. It is supplied at 50 % solids in water.

TEGO® DISPers 755 W is a slightly anionic,polymeric high-performance wetting and dispersing additive for waterborne formulations.Suitable for all kindsof pigments. With organic pigments, the outstanding stabilization and viscosity reduction can be observed. Low influence on coating properties, therefore suitable for exterior applications in industrial and transportation coating.Solvent-free.

AddWorks® LXR™ 314 is a mixture of a triazine UV absorber with a non basic hindered amine light stabilizer (HALS), designed for high performance stabilization of paints and clearcoats, and characterized by its broad compatibilities in both solventborne and waterborne coatings.

EBECRYL® 5850 is a high performing medium viscosity bio-based diacrylate. When properly formulated, coatings and inks based on EBECRYL® 5850 cured by ultraviolet light (UV) or electron beam (EB) energy display high reactivity with good hardness and scratch resistance.

UCECOAT® 7700 is a tin-free version of UCECOAT® 7699, a high performance acrylated polyurethane dispersion specifically developed for energy curable pigmented top-coats on wood furniture. It is also suited for clear finishes on wood along with other substrates and applications, such as field applied UV curable coatings for wood, concrete, VCT (vinyl composition tile), and resilient floors. UCECOAT® 7700 demonstrates high reactivity, including in thick pigmented coatings, and cured coatings exhibit outstanding scratch and stain resistance.

NANOCRYL® C 150 shows the highest performance in scratch and abrasion resistance without influencing gloss or transparency of the cured UV-coating.

NANOCRYL® C 130 shows the highest performance in scratch and abrasion resistance without influencing gloss or transparency of the cured UV coating.

UCECOAT® 7699 is a high performance acrylated polyurethane dispersion specifically developed for energy curable pigmented top-coats on wood furniture. It is also suited for clear finishes on wood along with other substrates and applications, such as field applied UV curable coatings for wood, concrete, VCT (vinyl composition tile), and resilient floors. UCECOAT® 7699 demonstrates high reactivity, including in thick pigmented coatings, and cured coatings exhibit outstanding scratch and stain resistance.

MAINCOTE™ AEH-10 is a waterborne dispersion of an acrylic-epoxy hybrid polymer designed for high performance two-component coatings useful in residential, commercial and industrial coatings applications. The unique acrylic-epoxy hybrid technology facilitates the formulation of low VOC coatings with long pot-life, fast dry and hardness development, and excellent durability properties including resistance to chemicals, solvents and weathering. Versatility in the selection of curing agent allows the formulation of coatings with a range of properties. MAINCOTE AEH-10 Resin is an epoxy-functional material that can be crosslinked with typical epoxy hardeners, including amine-based hardeners and acid-functional crosslinkers such as acrylic latexes. The ease of formulation and excellent balance of properties facilitated by MAINCOTE AEH-10 Resin make it an excellent choice for coatings used in a variety of residential, commercial and industrial applications.

TAMOL® 963 35% is a versatile, low-cost, non-foaming, water-soluble polyacid dispersant which offers excellent performance in a wide range of latex paint formulations. It is recommended for low sheen flat through semi-gloss acrylic, stirene-acrylic and vinyl acrylic formulations and is effective over a pH range of 7-11 with a wide temperature range.

UCECOAT® 7891 is a high performance acrylated polyurethane dispersion specifically developed for UV curable field applied matte wood and VCT (vinyl composition tile) floor coatings. UCECOAT® 7891 allows for the development of low gloss formulations without the use of silicas or other particles. This results in formulations with better shelf life, since the settling of particles is no longer a concern. If very low gloss formulations are desired, silica can be used at very low levels to achieve this. The very low level of silica also translates into better formulation stability. Floor coatings based on UCECOAT® 7891 exhibit a good balance of flexibility and hardness, thus providing good adhesion and coin scuff. Excellent solvent and chemical resistance are also provided through use of UCECOAT® 7891.

AddWorks® LXR™ 313 is a mixture of a triazine UV absorber with a low molecular weight hindered amine light stabilizer (HALS), designed for high performance stabilization of paints and clearcoats, and characterized by its broad compatibilities in both solventborne and waterborne coatings.

CYMEL® XW 3106 Resin is a specially alkylated, high solids melamine crosslinking agent designed for solvent-borne, two-pack ambient and low bake formulations. The low-temperature cure potential for this crosslinker provides the opportunity to formulate high-performance coatings for heat-sensitive substrates. These systems have excellent early hardness, resistance properties, appearance, and hot/cold cycle flexibility.

Dynasylan® 1146 diaminofunctional silane may be used in coatings, adhesives, and sealants to improve the adhesion of amino­reactive resins. These are resins such as silicones (RTV), two­part urethanes, silylated urethanes, MS polymers, and two­part epoxies to inorganic surfaces, plastic surfaces, and inorganic fillers. Dynasylan® 1146 silane is characterized by randomly­distributed linear and cyclic oligosiloxanes and fullfills the OECD polymer definition. Its low volatility and viscosity make compounding easy. Dynasylan® 1146 silane produces significantly less by- product (VOC) and has a correspondingly low odor level during application.

3M™ Glass Bubbles VS7000 is a high-performance polymer additives, specifically designed for use as density reduction fillers in automotive seam sealing and underbody coatings. The intrinsic hardness and spherical shape of 3M glass bubbles make them easier and less abrasive on processing equipment than many other fillers, while enabling surfaces that have excellent resistance to scrubbing and chipping.