Products

Silcolapse® 721 is a non-ionic aqueous 10% active silicone antifoam and/or defoamer. It offers excellent antifoam and defoaming properties in a wide variety of aqueous applications including those with incidental food contact as well as food processing applications. Silcolapse® 721 effectively controls foam at concentrations as low as 10 ppm solids, even at elevated temperatures. Silcolapse® 721 gives good results at wide-ranging pH and provides a cost effective solution where foam is a problem.

TEGO® DISPers 678 is a polymeric wetting and dispersing additive for solventborne formulations. Providesoutstanding long-term stability especially for formulations with mixed pigmentation.Stabilizes all kindsof pigments and reduces floatation.Excellent viscosity reduction makes it very suitable for 2- pack high solids formulations.

Exolit® OP 560 is a flame retardant that can be used for flexible polyurethane foams. It is a medium viscosity liquid and it is based on a non-halogenated phosphorus polyol. The product is a reactive flame retardant which can be chemically reacted into the polymeric matrix. Therefore, very low fogging values can be achieved which meet the most stringent emission standards for PU flexible foams in the automotive industry.

ASPECT® 7 is a mid-range talc product line specifically engineered for under-the-hood use in TPO applications when a natural grade is not needed.

D.E.H.® 29 Epoxy Curing Agent is an economical, liquid, complex mixture of linear, branched and cyclic ethylene amines. D.E.H.® 29 Epoxy Curing Agent offers more flexibility versus DETA,TETA, and TEPA type materials. It is recommended for epoxy coal tar systems, patch kits,two-pack adhesives, and other applications where color is not a limitation. In adhesives,D.E.H.® 29 Curing Agent yields much higher peel strength than DETA or TETA at comparable gel times and lower cost.

AEROSIL® E 805 is a fumed silica after-treated with an organosilane. It provides extraordinary rheological properties by maintaining brilliant transparency. It is very easy to disperse.

FlexTalc® 610D is an ultrafine talc product line specifically engineered for use in high performance TPO applications. It is made by a proprietary process that results in talc products which have very high aspect ratios, are easily dispersed, provide unmatched heat aging and offer exceptional compounded color. It is avalable in powder and compacted (D) forms, lightly compacted (LD) and sized/compacted (DS)

SUKOREZ® SU-100S is a water white cycloaliphatic hydrocarbon resin. The major usage is a tackifier for EVA, SIS, SEBS block copolymers, metallocene polyolefins and APAO.

SUKOREZ® NX-710 is a waterwhite thermoplasic resin obtained from polymerization and hydrogenation of cyclic ingredients. The major usages are tackifier for hot melt adhesive(HMA), hot melt pressure sensitive adhesive(HMPSA) and solvent based pressure sensitive adhesive(SBPSA), because of its good heat resistance and good compatibility with base polymers such as metallocene catalyzed polyolefin(me-PO), ethylene vinyl acetate(EVA), styrene block copolymer(SBC) and amorphous polyalphaolefin(APAO).

TEGO® DISPers 655 is a widely usable wetting and dispersing additive. Suitable for solvent borne, waterborne, and radiation-curing formulations and for universal colorants. Primarily stabilizes inorganic pigments, fillers, and effect pigments like aluminum pigments.

Licowax® PED 191 Powder is an oxidized, high density polyethylene wax with high molecular weight.

POLYGLYKOL P 41/300 is used in elastomer, leather, rubber, and textile processing, as well as heat transfer and metalworking fluids. It acts as a crosslinking agent, humectant, and solvent and is compatible with polyesters and polyurethanes (PU).

DERCOLYTE® A 125 is produced from the polymerisation of alpha pinene. It is a tackifying resin especially recommended to improve the adhesive properties (tack, adhesion) of hot melt formulations or solvent based adhesives.