Enhanced TDS
Identification & Functionality
- Blend
- No
- CASE Ingredients Functions
- Chemical Family
- Chemical Name
- EC Number
- 611-632-7
- Fluids & Lubricants Functions
- Industrial Additives Functions
- Molecular Formula
- H(OCH₂CH₂)ₙ(OCH₂CHCH₃)ₘOH¹
- Plastics & Elastomers Functions
- Product Code
- MITM15292
- Single Ingredient
- Yes
- Synonyms
- 2,2-Bis(hydroxymethyl)-1,3-propanediol polymer with methyloxirane and oxirane, Ethoxylated propoxylated pentaerythritol, Ethylene oxide-pentaerythritol-propylene oxide adduct, Ethylene oxide-propylene oxide copolymer ether with pentaerythritol, Ethylene oxide-propylene oxide copolymer pentaerythritol ether, Ethylene oxide-propylene oxide copolymer pentaethyritol ether, Pentaerythritol polyethylene-polypropylene glycol ether, Pentaerythritol propoxylate/ethoxylate, Pentaerythritol tetrakis(polyethylene-polypropylene glycol) ether, Polyethylene propylene glycol pentaerythritol ether, Polyethylene-polypropylene glycol ether with pentaerythritol, Polyethylene-polypropylene glycol pentaerythritol ether, Polyethylene-polypropylene glycol pentaerythritol tetraether, Polyoxyethylene polyoxypropylene pentaerythritol ether
- Technologies
- Product Families
Applications & Uses
- Applicable Processes
- Base Chemicals End Uses
- Compatible Polymers & Resins
- Fluids & Lubricants End Use
- Fluids & Lubricants Type
- Industrial Additives End Use
- Plastics & Elastomers End Uses
- Markets
- Applications
- Product Applications
Application:
Based on their physical and chemical characteristics, P 41-type polyglycols are used for a wide variety of applications.Fields of industrial application:
- Reactive polyol/polyether component in polyester or polyurethane resins as crosslinker.
- Component of auxiliaries for leather and textile processing.
- Lubricant and mold release agent for rubber and elastomer processing.
- Component of lubricant formulations.
- Water soluble, lubricating, and thickening component of metalworking fluids, e.g., fully synthetics.
- Humectant for paper, wood, and cellulose films.
- Solvent and humectant for dyes and inks.
- Modifier for production of regenerated viscose.
- Humectant and plasticizer for adhesives.
- Heat transfer medium.
Properties
- Physical Form
- Soluble In
- Note
- Typical Properties are for guidance only and not to be taken as product specifications. The tolerances are given in the product specification sheet.
- * Contact angle of water on V2A steel: 64°.
- ** Surface tension of water: 71.6 mN/m.
- ¹ - n:m = 4:1.
- Product Properties
- POLYGLYKOL P 41/300 is a clear, neutral viscous liquid at room temperature. POLYGLYKOL P 41/300 is soluble in water and polar organic solvents like acetone or methanol at room temperature. It is insoluble in pure hydrocarbons.
- POLYGLYKOL P 41/300 displays typical chemical reactions of alcohols/polyols. The solidification point of Polyglykol P 41/300 is –10°C.
Packaging & Availability
- Packaging Type
Principal Information
- Group Principal Number
- S000004
- Principal
Storage & Handling
- Storage Conditions
When stored in a cold, dry place in a closed container POLYGLYKOL P 41/300 can be kept for at least two years.
Other
- Appearance
- Clear viscous liquid
- Appearance (SDS)
- Liquid
- Color (SDS)
- Yellow
- Miscible in (SDS)
- Water
- Odor (SDS)
- Characteristic
- Other Hazards
- None known
- USA/DOT UN Number
- Not Applicable
- Optical Properties
Value Units Test Method / Conditions Color Scale max. 100.0 APHA APHA Refractive Index 1.465-1.469 - DIN 51432 at 20°C - Thermal Properties
Value Units Test Method / Conditions Ignition Temperature 310.0 °C °C DIN 51794 - Chemical Properties
Value Units Test Method / Conditions pH 7.0-9.5 - DIN EN 1262 10% w/w solution in water - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 2.0 yr yr - Mechanical Properties
Value Units Test Method / Conditions Contact Angle 40.5 ° ° 5% in aqueous solution*, V2A Steel Failure Load Stage min. 12.0 - DIN 51354 fail stage Scar Diameter 0.25 mm mm DIN 51350-3B 300N, 1 hr Weld Load 1500.0 N N - Physical Properties
Value Units Test Method / Conditions Cloud Point 94.0 °C °C 1% aqueous solution Cloud Point 81.0 °C °C 5g in 25g 25% BDG Density 1.092-1.096 g/cm³ g/cm³ DIN 51757 at 20°C Flash Point 270.0 °C °C DIN 51376 Molecular Weight 5000.0 g/mol g/mol Pour Point -10.0 °C °C ISO 3016 Viscosity 450.0 mm²/s mm²/s DIN 51562 at 40°C Viscosity Index 231.0 - ASTM D2270 - Material Composition
Value Units Test Method / Conditions Potassium Content max. 40.0 ppm ppm Sodium Content max. 40.0 ppm ppm - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Autoignition Temperature (SDS) 590.0 °F °F DIN 51794 Decomposition Temperature (SDS) min. 428.0 °F °F Density (SDS) 1.07 g/cm³ g/cm³ DIN 51757 at 50°C Flash Point (SDS) 518.0 °F °F DIN 51376 Kinematic Viscosity (SDS) 300.0 mm²/s mm²/s DIN 51562 at 0.6kPa Kinematic Viscosity (SDS) approx. 300.0 mm²/s mm²/s DIN 51562 at 50°C Molecular Weight (SDS) approx. 5240.0 g/mol g/mol Solidification Point (SDS) 14.0 °F °F DIN 51583 Vapor Pressure (SDS) max. 0.01 mbar mbar At 20°C pH (SDS) 7.0-9.5 - DIN 19268 at 20°C, concentration 100 g/l