Products

HECTGEL RD is a synthetic layered silicate consisting of Li, Mg and Si. Its structure is constituted by two layers of Si-O tetrahedron with one layer of Mg-O octahedron. It can hydrate with water and swell to form clear and colorless colloidal dispersions. Highly thixotropic gels can be formed at concentrations of 2% or more and these gels demonstrate highly shear thinning behavior. HECTGEL RD is used where a shear sensitive waterborne gel structure is desired, having high viscosity under low shear and low viscosity when exposed to high shear. Upon removal of shear the gel viscosity is quickly recovered.

Focus Additive RP RZ8 is a very cost effective water-soluble corrosion inhibitor additive designed to impart temporary rust protection for ferrous and non-ferrous applications. It does not contribute to discoloration on the surface of non-ferrous metals. It imparts lubrication properties when used at higher concentrations. It is designed to have a relatively low pH and high acid content, which provides the ability to formulate fluid concentrates with a variety of alkaline sources. Focus Additive RP RZ8 is non-foaming and has excellent stability in hard water up to 1500 ppm hardness. Focus Additive RP RZ8 gives rust protection when water evaporates. The thin liquid film that remains provides rust protection to ferrous surfaces, even under high humidity conditions. This film can easily be removed by rinsing with water. It also burns off cleanly in high temperature processing operations. Focus Additive RP RZ8 is composed of a mixture of organic acid salts, is DEA free and can be waste treated by adjusting the pH below the methyl orange end point.

ACRYSOL™ DR-5500 is a new associative thickener that delivers the same performance as ACRYSOL RM-5, but without the use of APEO surfactants. ACRYSOL™ DR-5500 provides excellent gloss, film build, and flow in latex paints. Being both APEO-free and solvent-free, ACRYSOL™ DR-5500 is ideally suited to meet the latest regulatory requirements for waterborne paints and coatings. This product enhances high shear (ICI Cone and; Plate) viscosity, resulting in coatings with high film build characteristics, improving hiding and appearance. Additional benefits for manufacturers include minimal roller spatter and the full realization of gloss potential in latex paints. Since ACRYSOL™ DR-5500 uses hydrophobically-modified alkali-soluble chemistry, it offers a high degree of resistance to bacterial and enzymatic attack, ensuring long-term paint viscosity stability.

DERCOLYTE® M 115 is produced from the copolymerisation of alpha and beta pinene. It is a bio based resin especially recommended for the formulation of high quality gum bases.

TERMIX® 4110 is a surfactant used in ornamentals, pest control, and turf management.

WANNATE® H1210 is a kind of monomeric cycloaliphatic diisocyanate which is colorless or light yellow liquid with low viscosity.

KRONOS® 2233 is a pigment compatible with ceramic substrates, used in coatings for glass, paper, plastic, and vitreous enamel, as well as in printing inks.

ELIX™ 158 I is a high rubber content Acrylonitrile Butadiene Styrene modifier used to improve toughness of engineering thermoplastics and PVC.

AEROSIL® 300 is a hydrophilicfumed silica with a specific surface area of 300 m²/g. Itprovides a verystrong rheologicaleffect.

Toyal PCF 400AG is used in paints and coatings markets and functions as a pigment.

Elevast™ D20 are specialty hydrocarbon fluids designed to enhance the performance and processability of a broad range of polymer systems and applications. Elevast efficiently lowers Tg of polyolefins with carefully designed liquid polymer, with minimal change in crystalline properties and without requiring exquisite morphology control.

Dynasylan® GLYMO is a bifunctional organosilane possessing a reactive organic epoxide and hydrolyzable inorganic methoxysilyl groups. The dual nature of its reactivity allows Dynasylan® GLYMO to bind chemically to both inorganic materials (e.g. glass, metals, fillers) and organic polymers (e.g. thermosets, thermoplastics, elastomers), thus functioning as an adhesion promoter, crosslinking agent and/or surface modifier. Dynasylan® GLYMO is a colorless low­viscosity liquid with a slight terpentine­like odor. It is soluble in alcohols, ketones and aliphatic or aromatic hydrocarbons.

Bayferrox® 222 is a single-ingredient, inorganic pigment with high-quality Iron(III) oxide content. It is used in applications that require Pigment Red 101 for coloring and is part of the Bayferrox® range of iron oxide pigments.

Supreme™ 883 is an ethylene-octene copolymer produced via Nexlene™ technology. Supreme™ 883 performs well in a wide range of various packaging films with excellent sealing property, cling property, and impact strength.