Products

Bluesil™ FLD 21648 is a medium viscosity amino functionalized siloxane, specially developed for the formulation of elastomeric coatings destined for use in textile applications, waterproofing of substrates, or polishes.

D.E.R.® 3212 liquid epoxy resin is a reactive product of epichlorohydrin and bisphenol a modified with and aromatic mono-functional reactive diluent.

AEROSIL® R 972 W is a fumed silica aftertreated with DDS (Dimethyldichlorosilane). The product thickening efficiency of AEROSIL® R 972 W ex RHE is consistent with the Waterford-produced AEROSIL® R 972 W. This profile is different than the thickening profile of standard RHE quality.

3M™ Glass Bubbles K1 are specially formulated for a high strength-to-weight ratio. This allows greater survivability under many demanding processing conditions, such as injection molding. They also produce stable voids, which results in low thermal conductivity and a low dielectric constant. 3M glass bubbles are available in a variety of sizes and grades to help you meet your product and processing requirements.

Bayferrox® TP 5272 is a single-ingredient inorganic pigment, known as Iron Oxide Red. It belongs to the iron oxides chemical family. It is categorized as Pigment Red 101.

3M™ Ceramic Microspheres W-410 are unique, semi-transparent, white-colored, fine particle size, high-strength microspheres. These products are typically used to reduce VOC levels, increase filler loadings, improve hardness and add burnish, scrub and abrasion resistance to a variety of coating formulations. Due to the ceramic chemistry of these products they are also UV transparent down to 250 nm and have utility in radiation-curable and thin-film powder coatings.

Ceridust® 5551 is a micronized, partly saponified ester of montanic acids.

D.E.R.® 750 Liquid Epoxy Resin is a di-functional reactive diluent modified reaction product of epichlorohydrin with bisphenol-A.

D.E.R.® 731 is used in casting, encapsulation, potting, and tooling processes. It functions as a reactive diluent, resin, binder, and matrix material in composite materials.

Bluesil™ SP 3309 A2 is a highly effective superspreading trisiloxane adjuvant for addition to spray formulations of agrochemicals. Bluesil™ SP 3309 A2 can significantly reduce the surface tension of spray formulations to max. 22 mN/m (the lower limit for conventional non-silicone adjuvants is ~30mN/m). This reduction is dynamically rapid, maximizing the adhesion of spray droplets when they impact on leaf surfaces. Bluesil™ SP 3309 A2 has been extensively optimized to improve efficiency even when applied to the most waxy, hard-to wet leaf surfaces. The spray droplets completely wet the target crop or weed, wrapping onto unsprayed surfaces to deliver insecticides and fungicides to where the pests and diseases may be concealed. The superspreading capability of Bluesil™ SP3309 A2 provides exemplary spray coverage enabling the volume of spray to be reduced without loss of performance. This reduction: Limits water usage Increases coverage area per tankful allowing for faster application speed (reduced refill) Enables lighter loads (less water) for micro-farmers using back-pack sprayers. Bluesil™ SP 3309 A2 is nonionic, making it compatible with all spray mixes.

Bayferrox® 510 is an inorganic iron oxide pigment that provides a strong red color. It is widely used in industrial applications, including paper manufacturing, plastics, and elastomers, due to its high pigment strength and stability. This pigment is ideal for applications that require durable, high-quality coloration in various materials.

Silcolapse® 430 is a compound 100% active containing polydimethylsiloxane oil and silica with an excellent behaviour in a large range of pH. Silcolapse® 430 is mainly intended for treatment of anhydrous and aqueous foaming systems and has many applications in industry and food.

Protectosil® ANTIGRAFFITI SP is used for surface treatment applications.

HYDROGRAL® P is a pentaerythritol ester of partially hydrogenated rosin. It is specially recommended to improve oxidation resistance and long term adhesive performances of pressure sensitive adhesives.

TEGO® DISPers 752 W is an anionic wetting and dispersing additive for transparent iron oxides and transparent titanium dioxide in waterborne formulations. Provides outstanding transparency, high pigment loadings, and long-term stability, especially when used in binder-free dispersions.