Products

Exolit® AP 750 is a non-halogenated flame retardant based on ammonium polyphosphate as main component, which develops its effectiveness through phosphorus/nitrogen synergism. In contrast to similar competitive material, it shows high processing stability. Exolit® AP 750 differs in its mode of action from non phosphorus-based flame retardants (e. g. brominated, chlorinated or mineral FRs like ATH) by achieving its effect through intumescence. Material containing Exolit® AP 750 will foam on exposure to flame. The carbon-rich foam layer so formed will protect the polymer and in many cases the substrate below through its heat insulating effect, reduces further oxygen access and prevents dripping in case of a thermoplastic based formulation. Beyond the primary effects on fire behavior such as reduction of flame propagation rate, rate of heat release, dripping behavior, residual lengths of test specimens after flame tests etc., positive secondary fire effects such as low smoke density, no release of corrosive off-gasses, lower formation of toxic smoke gasses are of great interest.

Bluesil™ SP 3304 is a non-hydrolysable polyether modified polydimethylsiloxane.

TEGO® Dispers 735 W is a chemical mixture and blend used in grinding applications.

Licocene® PP 1502 granules is a propylene-Ethylene-Copolymer Wax.

CIMTALC® 7 is produced from high purity ore, which provide low iron content, low surface area and excellent color in dry form as well as when incorporated with resins. CIMTALC® 7 is primarily used in performance polypropylene, where improved tensile strength, flexural modulus, heat distortion temperature, increased stiffness, reduced shrinkage, and lower compounding costs are required. CIMTALC® 7 is are platy, hydrophobic, non-abrasive and chemically inert.

Focus ChloroPar W-40AO is a chlorinated very long chain alkane (C24-28). This product can function as an extreme pressure additive, flame retardant, and plasticizer. A small amount of stabilizer has been added to maintain product quality during transport and storage.

CEAMTEX 90-756 is a speciality hydrocolloid system, standardised to give viscosity in water, in order to obtain an uniform performance.

SIPERNAT® 44 MS is a Zeolite of high purity. SIPERNAT® represents a specific product range of precipitated silica, aluminium and calcium silicates.

B-72 N-Propyl Acetate Solution-50% is a blend of n-propyl acetate, an acetate compound used as a binder and resin in various applications. It functions primarily as a binder in printing inks and is also used as an intermediate in industrial processes. This solution is particularly suited for use in printing ink formulations.

SIPERNAT® 383 DS isa very finely ground silica with a slightly alkaline pH-value. SIPERNAT® represents a specific product range of precipitated silica, aluminium and calcium silicates.

SIPERNAT® represents a specific product range of precipitated silica, aluminium and calcium silicates. SIPERNAT® D 17 is a hydrophobic (i. e. not wettable by water) silica also used in defoamer.

Dynasylan® HYDROSIL 2627 is an aqueous oligomeric aminoalkyl-functional silane hydrolysate. It is a colorless to slightly yellowish aqueous solution with an amine-like odour, miscible with alcohols or water.

TEGO® Addbond LTK improves adhesion and flexibility of solvent borne coatings on steel and galvanized steel.