Products

SIPERNAT® 45 is a carrier silica with a particularly high absorbency. It has the capacity to convert liquid, active substances or solutions into powders. Concentrates of up to 75% can be produced using SIPERNAT® 45. SIPERNAT® represents a specific product range of precipitated silica, aluminum and calcium silicates.

WWT882193 Dark Gray is a pigment used in adhesives and sealants, and architectural coatings.

Bluesil™ MH25 A2 is straight chained polymethylhydrogensiloxane fluids.

DERTOPHENE® T 115 is a light-colored and low VOC terpene phenolic resin. It is compatible with various polymers and suitable for solvent based, hot melt adhesives.

AEROSIL® R 812 is a fumed silica after-treated with organosilane (HDMDS) with high specific surface and marked hydrophobia.

D.E.H.® 802 is a polyamine adduct waterborne curing agent with optimized rheology specially designed to provide superior performance in roller applications. It can be used with liquid Bisphenol A and/or Bisphenol F epoxy resins. It is supplied at 50 % solids in water.

GRANOLITE® P is a pentaerythritol ester of rosin, is a light-colored and deodorized resin suitable in various adhesive and road marking Hot Melt formulations.

SURFYNOL® DF-75 defoamer is an organic-based mineral oil-free additive designed to provide knockdown and sustained defoaming in a wide variety of water-based formulations. Performance benefits can be obtained when this product is incorporated into aqueous inks, overprint varnishes, coatings, adhesives and paper coatings. This compound is particularly useful for foam control in systems that are based upon acrylic resins.

DYNOL™ 604 is an acetylenic diol based super wetter providing very good static and dynamic surface tension reduction in waterborne coatings and inks.

Diethyl toluene diamine (DETDA) is used in organic synthesis and is compatible with epoxies (EP) and polyurethanes (PU). It serves as an intermediate in base chemicals and is used in lubricants and polyurethane applications. The product functions as a chain extender, intermediate, antioxidant, and curing agent in base chemicals, industrial additives, and plastics and elastomers.

Exolit® OP 950 is a white granular powder based on an organic phosphinate. The product is not hygroscopic and slightly soluble both in water and in common organic solvents. It melts at 200°C.

DOP is still widely used as a plasticizer in selected applications where volatiles are less of an issue. It is also used as a hydraulic fluid and as a dielectric fluid in capacitors. DOP was the most widely used material as a plasticizer in manufacturing of articles made of PVC. Due to toxicity reasons, its usage has dropped and has been replaced by lower volatile phthalate and phthalate free products in some PVC and other applications.

ASPECT® 3 is a mid-range talc product line specifically engineered for under-the-hood use in TPO applications when a natural grade is not needed.

3M™ Glass Bubbles K11 is a filler used in plastics and elastomers. It offers enhanced physical properties, chemical stability, and excellent processing stability. This cost-effective solution improves flow, provides higher filler loading, and ensures low density, low alkalinity, and excellent water resistance. Additionally, it has a long shelf life and is lightweight, making it suitable for various applications.