Products

Orgalloy® LE 6000 NAT is a polyamide alloy especially designed for cable sheathing and blown film extrusion. Orgalloy® EM 067 HSP is natural grade dedicated to extrusion offers excellent barrier properties and chemical resistance to hydrocarbons, alcohols and solvents.

FlexTalc® 815 are an ultrafine talc product line specifically engineered for use in high performance TPO applications. FlexTalc® products are made by a proprietary process that results in talc products which have very high aspect ratios, are easily dispersed, provide unmatched heat aging and offer exceptional compounded color. They are avalable in powder and compacted (D) forms, lightly compacted (LD) and sized/compacted (DS).

Hatcol® 3812 is aN advanced high-stability polyol esters.Hatcol® 3812 was developed to provide clean lubrication in high temperature environments, especially where lubricant deposits or coking residues are a problem. It contains antioxidants, anti-wear, and anticorrosion additives selected and balanced for optimum performance in a polyol ester lubricant.

Focus Base P 20 is an emulsifier base with polyisobutylene succinic anhydride (PIBSA) as the primary emulsifier in place of natural and synthetic sodium sulfonate. It is designed for use in both paraffinic and naphthenic base oils.

ORGASOL® 1002 ES 5 NAT1 is a spheroïdal powder of polyamide 6, with 50 µm as average diameter and a narrow particle size distribution.

LOTRYL® 17BA07N is a random copolymer of Ethylene and Butyl Acrylate produced by high-pressure radicalar polymerization process.

Focus HO Sunflower Oil is a biodegradable vegetable oil derived from sunflower oil.

Hatcol® 2910 is a pure adipate diester base stock containing medium chain branched alcohols. Hatcol® 2910 combines excellent high temperature oxidative stability with low temperature flow.

ASPECT® 15 is a mid-range talc product line specifically engineered for under-the-hood use in TPO applications when a natural grade is not needed.

Focus Polysurf Semi Base 25 produces an excellent general purpose semi-synthetic fluid when diluted with water by the formulator. Focus Polysurf Semi Base 25 has exceptional wetting properties and is formulated with corrosion inhibitor and lubricity additives. It is designed to be diluted at a ratio of 30/40% base to 70/60% low hardness water. Focus Polysurf Semi Base 25 does not contain biocides, but it is compatible with most standard biocides. Depending on the biocide, a slight adjustment with oleic acid may be required.

CRAYVALLAC® PA4 X 20 is a rheology modifier pre-activated amide wax supplied in a mixture of xylene and alcohol. It is a rheology modifier in paste form with enhanced transparency, excellent anti-sagging and anti-settling properties.CRAYVALLAC® PA4 X 20 is supplied in the form of crystalline fibres. In a coating system, these fibres form an interacting network. This network gives rise to the shear thinning rheology of the final coating. This shear thinning characteristic provides a very high viscosity under the low shear rates associated with sedimentation, and a low viscosity at the much higher application shear rates. The net result is excellent control of sedimentation combined with ease of application.

EBECRYL® 3415 is a modified bisphenol A epoxy acrylate diluted with 40% 1, 6-hexanediol diacrylate (HDDA). This acrylated epoxy was developed for ultraviolet light (UV) curable screen printing, and exhibits excellent reactivity and good adhesion to various non-porous substrates. EBECRYL® 3415 meets all regulatory requirements and is no longer subject to the Significant New Use Rule (SNUR).

AEROSIL® 300 is a hydrophilicfumed silica with a specific surface area of 300 m²/g. Itprovides a verystrong rheologicaleffect.

RHOPLEX® 57 is a binder and resin used primarily as a binder.

EBECRYL® 811 is an ultraviolet light (UV) or electron beam (EB) curable polyester acrylate for either wet or dry offset printing on plastic substrates. Inks made using EBECRYL® 811 obtain excellent adhesion to calendered vinyl, polystyrene, polyolefins, polycarbonate and PVC. The water balance of this product allows inks based upon it to be run on press with low amounts of fountain solution: a key parameter for printing on non-absorbent substrates.