Products

TEGO® Rad 2250 (Spain) is a broadly usable radically cross-linkable slip agent for clear coats. It provides efficient wetting, slip, and flow combined with very good compatibility.

SILCOLEASE™ PC-94 is an emulsion of Dioctyl Tin Dilaurate. This is the catalyst component of a silicone release formulation and promotes polymerization through a polycondensation reaction.

Additin® RC 7001 is an antioxidant used in gear oils, greases, hydraulic oils, turbine and compressor fluids, and jet turbine engine oils. It is applied at a dosage of 0.5 - 2% and provides excellent oxidation stability, making it ideal for use in compressor oils, greases, hydraulic oils, and automatic transmission fluids.

TEGO® Foamex 811 is an effective defoamer concentrate based on polyether siloxane technology. Broad usability with an excellent balance of effectiveness and compatibility.

LP-V01-20 ZnS/11P is a pigment used in industrial additives for colorants and applicable across fluids & lubricants, plastics & elastomers, and CASE ingredients.

CARPOL® EDAP-770 is an ethylenediamine-initiated polyether polyol. The resulting material has a nominal functionality of four and a typical hydroxyl number of 770. This tetrol is polymerized solely with propylene oxide and is autocatalytic due to its amine content. This polyol’s functionality makes it optimal for use in rigid foams as a crosslinking modifier. In addition, CARPOL® EDAP-770 can also be used as a curative for most C.A.S.E. applications.

TEGOMER® E-Si 2330 is a Epoxy-functionalpolydimethylsiloxane

Corrostain™ 228 features a unique pigment chemistry which combines the dual functionality of Corrosion Inhibition and Tannin Stain Inhibition. This dual functionality aids in the reduction of raw material inventories and also provides effective inhibitor formulations. It is designed to provide good stability and performance in both solvent and water based systems. Typical use level is between 2 - 6% based upon total formula weight.

CARPOL® SPA-530 is a sucrose amine-initiated polyether polyol. The high functionality of the initiators yields a resultant polyol with a nominal functionality of 5.5 and a typical hydroxyl number of 530. This polyol’s functionality and short-chained nature make it optimal for use in rigid foam. In addition, CARPOL® SPA-530 contains amine and therefore is autocatalytic. This allows the formulator to use less catalyst while achieving the same reactivity seen in other neutral rigid polyols.

PRIMACOR™ XUS60756.24L is an ethylene acrylic acid copolymer suitable for cast, extrusion coating and hot melt applications .It has excellent adhesion to metallic, cellulosic, glass, fabric and other substrates.

D.E.R.® 692H is a low molecular weight "2.5-type" epoxy resin with Flow modifier.

Silcolapse® 411 is a compound containing polydimethylsiloxane oil and a mineral filler in colloidal dispersion. It is intended mainly for treating anhydrous media, but also aqueous media, in numerous industries (oil, chemicals, metallurgy, etc.). Its low viscosity and its efficiency in alkaline media are of particular interest. Silcolapse® 411 is intended for industrial use only, and should not be used in the manufacture of foodstuffs, cosmetics or pharmaceutical products.

WANNATE® 8312 is a modified diphenylmethane diisocyanate (MDI), containing relatively high level of 2, 4’-MDI. It is a light yellow liquid at room temperature. WANNATE 8312 is specially designed for polyurea spray elastomer applications.

CRAYVALLAC® WS-4700 is a 40% active dispersion of polyethylene wax in isopropanol. The low viscosity and high active content of this dispersion, together with freedom from dust, assist the efficiency of manufacturing processes. CRAYVALLAC® WS-4700 provides the formulator with the means of controlling the frictional characteristics of a coating as well as enhancing its surface protection properties.