Enhanced TDS
Identification & Functionality
- Chemical Family
- Chemical Name
- Country of Origin
- Function
- Antioxidant
- Product Code
- MITM08148
- Product Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Product Features
Applications & Uses
- Product End Uses
- Markets
- Applications
- Application Information
- Hydraulic oils
- Compressor oils
- Synthetic ester based jet engine oils
- Polyglycols, silicon oils
- Greases
- ATF
Additin® RC 7001 is an aminic antioxidant of high purity and characterized as octylated diphenylamine. Additin® RC 7001 has excellent handling and blending properties. It is supplied in small granules in order to avoid dust problems associated with powders.
Additin® RC 7001 is used to stabilize lubricants against oxidation and sludge formation. (e.g. high temperature lubes like silicones, but also ATF).
Typical treat rates are 0.5 - 2 %.
Additin® RC 7001 is also applied in greases and shows synergistic effects in combination with Additin® RC 7130 or Additin® RC 7010. In mineral oil based lubricants such as turbine oils Additin® RC 7001 is synergistically active in combination with phenols e.g. Additin® RC 7110 or Additin® RC 7115 and copper inhibitors e.g. Additin® RC 8221 or Additin® RC 8239.
Properties
- Physical Form
- Soluble In
- Solubility Data
Soluble in mineral oils and synthetic base oils. However, it is necessary to verify the solubility in the base oils used and the compatibility with other additives.
Regulatory & Compliance
- Compliance (Industry Standards)
- Compliance (Regulatory)
- Manufacturing Facility Standards
- Product Certifications
Packaging & Availability
- Packaging Type
Principal Information
- Group Principal Number
- S000008
- Principal
Storage & Handling
- Storage Conditions
approx. 12 months in a dry place at room temperature
Other
- Appearance
- Light - dark brown granules
- Appearance (SDS)
- Wax like pastilles granules powder or flakes
- Color (SDS)
- Light brown
- Item Number
- Odor (SDS)
- Characteristic
- Other Hazards
- None known
- Protect from Freezing
- No
- Temperature Control
- No
- USA/DOT UN Number
- Not Applicable
- Application Information
Value Units Test Method / Conditions Dosage (Use Level) 0.5-2.0 % - Chemical Properties
Value Units Test Method / Conditions Nitrogen Content 3.5 %(W/W) - Physical Properties
Value Units Test Method / Conditions Bulk Density 530.0 kg/m³ at 20°C Density 990.0 kg/m³ ASTM D941 at 20°C Melting Point min. 85.0 °C - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Boiling Point (SDS) 464.0 °F at 977.7 hPa Bulk Density (SDS) 0.5555 g/cm³ At 68°F Flash Point (SDS) 392.0 °F at 977.9 hPa Melting Point (SDS) 185.0 °F Specific Gravity (SDS) 0.99 - at 77°F Vapor Pressure (SDS) 0.0006733 hPa At 77°F - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 730.0 d