Products

Mineral Jelly #17 is a hydrocarbon product composed of petrolatum.

MAINCOTE™ PR-71 is used for all protective coating applications, the first need is for adhesion to and passivation of the substrate. In the past, difficult-to-adhere-to substrates were often treated with a vinyl wash primer to passivate the substrate and provide adhesion for subsequent coats. These vinyl wash primers are increasingly difficult to use as they are very low in solids, high in VOC, and contain toxic pigments. In contrast, MAINCOTE™ PR-71 Waterborne Acrylic Resin allows the coatings manufacturer to supply primers that not only adhere to difficult metallic substrates, but also give good corrosion resistance over carbon steel. This resin's ability to be topcoated by most solvent-based coating systems makes it a very versatile water-based primer.

EBECRYL® P104 is an acrylated amine used as a hydrogen donor, or photoactivator, in ultraviolet light (UV) curable coatings and inks. When used in formulations in combination with a photosensitizer (e.g. benzophenone), EBECRYL P104 provides rapid UV cure response in air by mitigating the effects of oxygen inhibition at the coating or ink surface. Recommended levels are from 5 to 15% based on total formulation, usually combined with 3-5% photosensitizer. EBECRYL P104 can be used with EBECRYL P39 (a polymeric benzophenone derivative) for formulations requiring low residual odor.

Esterex™ P61 is a API category Group V fluids. Esterex™ P61 has excellent low temperature properties, good lubricating properties, and low volatilities. Esterex™ P61 can be used as sole basestocks or blendstocks with other synthetic fluids in many automotive and industrial lubricant applications. Esterex™ P61 is ideal for use in air compressor applications, where low viscosity indices are acceptable and low cost, clean operation is desirable.

TERMUL® 5812 is a proprietary blend of anionic and nonionic surfactants. The product is clear and slightly viscous at room temperature.

EBECRYL® 5850 is a high performing medium viscosity bio-based diacrylate. When properly formulated, coatings and inks based on EBECRYL® 5850 cured by ultraviolet light (UV) or electron beam (EB) energy display high reactivity with good hardness and scratch resistance.

Foral® 85 resin is a glycerol ester of hydrogentated gum rosin. It is an exceptionally pale, thermoplastic resin that has outstanding resistance to oxidation and to discoloration caused by heat and ageing. It can be used in a wide array of adhesive tackifier applications and in protective/barrier type coatings where light color and oxidation resistance are needed.