Products

D.E.H.® 26 Curing Agent is an economical liquid aliphatic polyamine hardener, tetraethylenepentamine (TEPA), that offers a short pot-life and cures in minutes with standard unmodified liquid epoxy resins. Similar to D.E.H.® 24 Epoxy Curing Agent in application, it provides lower vapor hazard to workers due to its higher boiling point. D.E.H.® 26 Epoxy Curing Agent is used for maintenance paints, the manufacture of epoxy-amine adducts, in adhesives, and civil engineering applications. It is also used as an accelerator for polyamide curing agents. In electrical applications, D.E.H.® 26 Curing Agent is used for casting, potting and encapsulation.

Solumer™ 875L is an ethylene-octene copolymer produced via Nexlene™ technology. Solumer™ 875L performs well in a wide range of general purpose thermoplastic elastomer applications and has excellent flow characteristics.

Non-Leafing Type Aluminium Paste 5660NS is used in paints and coatings, and printing and packaging. It features a non-leafing property for case ingredient applications.

SIPERNAT® 22 LS is a finely ground silica with a high absorption capacity for liquids. SIPERNAT® represents a specific product range of precipitated silica, aluminium and calcium silicates.

EBECRYL® 230 is an aliphatic urethane diacrylate characterized by its light color and low viscosity. Films of EBECRYL 230 cured via exposure to ultraviolet light (UV) or electron beam (EB) are soft and flexible, and are resistant to yellowing. EBECRYL 230 is often used as a modifier to improve the flexibility of finished formulations.

EBECRYL® 3720-HD20 is the bisphenol A epoxy diacrylate, EBECRYL 3720, diluted 20% by weight with the reactive diluent 1,6-hexanediol diacrylate (HDDA) to provide a lower viscosity, easier handling product. EBECRYL 3720-HD20 exhibits light color and fast cure response. Films of EBECRYL 3720-HD20 cured via ultraviolet light (UV) or electron beam (EB) demonstrate high gloss, surface hardness, and superior chemical resistance.

SURFONIC® TDA-8/90 is the 90% active aqueous solution of the eight- mole ethoxylate of isotridecyl alcohol. It is a water soluble, nonionic surface-active agent which is compatible with other nonionic surfactants and with most anionic and cationic surfactants.

Bayferrox® 420 is an iron oxide-based yellow pigment, also known as ferric oxide yellow. It is primarily used in industrial additives, plastics, and elastomers for its pigmenting properties. This pigment is widely utilized for its excellent color strength and stability in a variety of applications.

ACEMATT ® HK 390 is an untreated, very-fine-particle-sized matting agent based on precipitated silica. Duetoitshigh compatibility, it can be used in a large variety of coatings. The improved orientation in coating systems effectively prevents mottling.

KRONOS® 1171 is an anatase pigment approved for coloring pharmaceutical products i. e. tablets, capsules, lotions, nutraceuticals. It can also be used as a colorant in decorative cosmetics and personal care products like eye shadows, lip sticks, nail varnishes, creams, soaps and tooth pastes etc.

REAFREE® 6818 is a binder and resin used in paints and coatings.

CYMEL® 304 Resin is a specially alkylated, high solids melamine crosslinking agent designed specifically for industrial wood coating applications. Systems formulated with CYMEL® 304 resin exhibit excellent catalyzed stability and films develop excellent early hardness, resistance properties, appearance, and cold check resistance. It has very low free formaldehyde and low evolved formaldehyde on cure relative to conventional urea-based formulas.

AP 5971 is a modified cycloaliphatic amine hardener for epoxy resin based lacquers and coatings.