Products

HIKOTACK® P-901 is pale yellow thermoplastic resin obtained from polymerizing unsaturated aromatic olefins and diolefins derived from the process of thermal cracking of naphtha. The major usages is tackifier for Ethylene Vinyl Acetate copolymer (EVA) based hot melt adhesive (HMA). HIKOTACK® P-901 shows very good compatibility with numerous polymers as well as EVA, and provides good solubility with various solvents. In addition, this grade can be used as rubber compounding agent for tires, tubes, rubber coated clothes.

CARPOL® GSP-370 is a glycerin/sucrose-initiated polyether polyol. The high functionality of the initiators yields a resultant polyol with a nominal functionality of seven and a typical hydroxyl number of 370. Due to this polyol’s high functionality, it is typically used in rigid foam and its applications. Blending this polyol with other polyether polyols allows for foam systems with high to lower degrees of crosslinking. In addition, CARPOL® GSP-370 is mildly catalytic, which enables the use of less catalyst while still providing the formulator with control over the system’s reactivity.

Focus Polysurf Semi Base 25 produces an excellent general purpose semi-synthetic fluid when diluted with water by the formulator. Focus Polysurf Semi Base 25 has exceptional wetting properties and is formulated with corrosion inhibitor and lubricity additives. It is designed to be diluted at a ratio of 30/40% base to 70/60% low hardness water. Focus Polysurf Semi Base 25 does not contain biocides, but it is compatible with most standard biocides. Depending on the biocide, a slight adjustment with oleic acid may be required.

Durastrength® 350 impact modifier is a high performance acrylic impact modifier that imparts superior impact properties to rigid vinyl products. It was designed to give the impact resistance necessary to pass critical impact test procedures, while maintaining the excellent weatherability, processability and flow properties of Durastrength® 200 impact modifier.

Bluesil™ RES 6405 is a 50% solids methylphenylsilicone resins in Toluene (6405) or Xylene solution (6405X). These resins are ideal for the formulation of heat resistant coatings for industrial applications with improved weatherability.

AEROSIL® E 2000 is a single-ingredient organosilicon compound, specifically silica dimethyl silylate. It is compatible with silicone elastomers and is commonly used in toner applications. This product is designed to enhance the performance of various formulations, particularly in ink and toner products.

AEROTEX® IBMA Monomer a homolog of N-methylolacrylamide (NMA), is the isobutyl ether of NMA. It contains a readily polymerizable vinyl group as well as a crosslinkable iso-butoxymethyl group.

Superior Graphite 5590 is a purified synthetic graphite manufactured using Superior Graphite’s proprietary electro-thermal purification technology. This continuous high-temperature process exposes the raw materials to extremely high temperatures, so that impurities including inorganic contaminants are evaporated. Superior Graphite 5590 is an ultrafine grade within this product line produced using Superior Graphite’s dedicated milling and screening technology. Main uses are wear reduction and increase in thermal conductivity for high demanding applications.

FRIEND COLOR® D462 BL is a pigment from the aluminum compounds chemical family.

EBECRYL® LEO 10551 is a low viscosity amine modified polyether acrylate oligomer that provides low extractables, low odor and low migration after UV or EB curing.EBECRYL LEO 10551 is recommended for use in low odor and low migrating UV overprint varnishes (OPV’s) and inks for indirect food packaging applications.

AEROSIL® R 972 Pharma is a high purity, amorphous, anhydrous, hydrophobic colloidal silica for use as an excipient in pharmaceutical products (tested according to Ph. Eur. and USP/NF monographs).

LOTADER® AX8750 is a random ethylene-butyl acrylate-glycidyl methacrylate terpolymer. Acrylic ester brings softness and polarity, while keeping high thermal stability during processing. The high content of acrylic ester leads to high flexibility (low crystallinity) and high impact absorption behaviour. Glycidyl methacrylate provides reactivity (versus OH, COOH and NH₂ groups), leading to optimal dispersion during melt mixing with engineering thermoplastics. As an ethylene copolymer, LOTADER® AX8750 is compatible with LDPE in all proportions, and with almost all other ethylene copolymers. LOTADER® AX8750 is suitable as an additive to improve impact strength of engineering thermoplastics (PPS, PBT, PET) and PC/PBT, PC/PET and PC/ABS alloys. LOTADER® AX8750 can be used as a compatibiliser for polyesters/polyolefins blends, as bitumen performance enhancer and adhesion promoter onto metallic surface.

TAMOL® 983 is a versatile, low-cost, non-foaming, water-soluble polyacid dispersant which offers excellent performance in a wide range of latex paint formulations. It is recommended for low sheen flat through semi-gloss acrylic, stirene-acrylic and vinyl acrylic formulations and is effective over a pH range of 7-11 with a wide temperature range.

COMFORTSIL CATA 2812 A1 is used in textile coating applications and is compatible with textile substrates and surfaces.

DOCCO 007 Gloss Oil is a 70% solids gloss rosin varnish dissolved in solvent naphtha. In comparison to DOCCO #006, DOCCO #007 Gloss Oil dries faster and to a higher hardness.