Enhanced TDS
Identification & Functionality
- Blend
- No
- CASE Ingredients Functions
- Chemical Family
- Function
- Oligomer, Monomer
- Product Code
- MITM00470
- Single Ingredient
- Yes
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Coating End Applications
- Cure Method
- Ink & Toner End Applications
- Markets
- Applications
- Product Applications
- EBECRYL® LEO 10551 is recommended as the main oligomer for low extractable, low odor overprint varnishes and as the letdown for flexographic inks for indirect food packaging and related applications.
- It is also suitable for screen and
Properties
- Physical Form
- Product Properties
- Good cure response
- Good flexibility
- High gloss
- Low extractables
- Low odor
- Low migration
Regulatory & Compliance
- Quality Standards
Packaging & Availability
Principal Information
- Group Principal Number
- S000001
- Principal
Storage & Handling
- Storage Conditions
- Care should be taken not to expose the product to high temperature conditions, direct sunlight, ignition sources, oxidizing agents, alkalis or acids.
- This might cause uncontrollable polymerization of the product with the generation of heat.
- Storage and handling should be in stainless steel, amber glass, amber polyethylene or baked phenolic lined containers.
- Procedures that remove or displace oxygen from the material should be avoided.
- Do not store this material under an oxygen free atmosphere.
- Dry air is recommended to displace material removed from the container.
- Wash thoroughly after handling.
- Keep container tightly closed.
- Use with adequate ventilation.
Other
- Appearance
- Clear liquid
- Color (SDS)
- Clear to milky white
- Item Number
- Odor
- Low odor
- Other Hazards
- Polymerization may occur from excessive heat, contamination or exposure to direct sunlight .
- Protect from Freezing
- Yes
- Temperature Control
- Yes
- USA/DOT UN Number
- Not Applicable
- Chemical Properties
Value Units Test Method / Conditions Free Amine Content 1079.0 %(W/W) %(W/W) Free Amine Content max. 200.0 ppm ppm as residue - Material Composition
Value Units Test Method / Conditions Residual Solvent Content max. 100.0 ppm ppm - Optical Properties
Value Units Test Method / Conditions Color Scale max. 2.0 Gardner Gardner Gardner Color Scale - Physical Properties
Value Units Test Method / Conditions Density 1.09 g/mL g/mL At 25°C Molecular Weight 500.0 g/mol g/mol Storage Temperature 39.2-104.0 °F °F Viscosity 60.0-90.0 mPa.s mPa.s At 25°C - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Boiling Point (SDS) min. 100.0 °C °C Density (SDS) 1.1 g/cm³ g/cm³ Flash Point (SDS) 207.0 °C °C Cleveland Open Cup Vapor Pressure (SDS) max. 1.33 hPa hPa at 20°C Volatile Content (SDS) max. 0.5 % % - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 0.0 d d