Products

DOCCO 006 Gloss Oil is a 60% solids gloss rosin varnish dissolved in solvent naphtha. In comparison to DOCCO #007, DOCCO #006 Gloss Oil dries slower and to a lower hardness.

Protectosil® WB CONCENTRATE is a clear, penetrating, breathable water repellent for use on brick, concrete masonry units and some natural stones. A 100% concentrated alkyltrialkoxysilane which is intended to be diluted with water and provides the high performance traditionally associated with alcohol carried systems. Prevents water and waterborne contaminants from entering the substrate and causing premature deterioration. Protectosil® WB CONCENTRATE is especially suited for imparling water repellency to substrates such as brick masonry and split-face block. By preventing water and waterborne contaminants from entering the substrate, Protectosil® WB CONCENTRATE reduces such problems as efflorescence, leaching, acid rain deterioration, scaling, dirt buildup, staining and corrosion of reinforcing steel. Treated surfaces are fully breathable because the natural moisture vapor transmission is not affected. This will eliminate problems caused by entrapped moisture, including blushing of the sealer and freeze-thaw damage to the masonry.

Europrene® SOL T 177 C is a radial block copolymer obtained by anionic polymerisation. The polymer is based on styrene and butadiene, where bound styrene is 50 % wt. The polymer is extended with a clear paraffinic oil (40 phr). A non staining, TNPP free antioxidant system is added during the production process.

POLYGLYKOL P 41/12000 is used in leather and metal processing, heat transfer fluids, and metalworking fluids. It acts as a humectant, plasticizer, solvent, lubricating agent, and thickener. It also functions as a crosslinking agent in industrial additives and a mold release agent in plastics and elastomers. Compatible with polyesters and polyurethanes (PU).

TEGO® Rad 2300 is an efficient non-foaming, radically cross-linkable substrate wetting and slip additive. Recommended even for high shear applications and the wetting of low energy substrates including fresh litho inks.

WANNATE® HTBL-275MS is a 3,5-dimethylpyrazole blocked aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) and dissolved in 17% solvent naphtha 100 and 8% propylene glycol monomethyl ether acetate, colorless to slightly yellowish clear liquid.

Focus Ester OE 1005 is specially designed to use in water-dilutable metalworking coolants. Focus Ester OE 1005 will provide lubrication and corrosion protection with outstanding wetting characteristics. Using Focus Ester OE 1005 will reduce or eliminate the amount of additives needed in metalworking coolants, like chlorine, fatty acids and amides. Focus Ester OE 1005 does not contain any phosphorus, chlorine or sulfur and is ashless.

Additin® RC 3502 is an ashless friction modifier used in diesel engine oils, engine oils, gasoline engine oils, gear oils, greases, manual or automatic transmission fluids, motor oils, and transmission fluids. It enhances friction reduction, fuel efficiency, and wear protection, while offering good compatibility, detergency, oxidation stability, surface activity, and low-temperature performance.

VANCRYL® 450 is a high solids colloidal dispersion that can be neutralized with ammonia or other alkaline materials to provide an outstanding vehicle for corrugated printing ink applications. VANCRYL® 450, at 40% solids, reduces the cost in ink systems based on pre-neutralized colloidal acrylics. VANCRYL® 450 exhibits excellent black pigment grinding, and high drink in corrugated systems. This polymer, when neutralized with ammonia at 10% solids in water, has a viscosity of 150 cP, or about 40 seconds on a # 2 Zahn cup. It provides excellent transfer and printing at this low, economical solids level. Neutralization can be easily accomplished by a simple mixing of 100 parts polymer wet, 95 parts water, and 5 parts ammonia. This mixture produces a 20% solids colloidal emulsion with a viscosity of 6000 to 9000 cP. It can be used in black pigment dispersions as well as color letdowns for corrugated inks. VANCRYL® 450 is also an effective thickener for other formulations based on acrylic and styrenated acrylic polymers.

EBECRYL® 1365 is a hexa-functional silicone modified urethane acrylate diluted in 50% of EBECRYL® 160. EBECRYL® 1365 can be used to prepare UV/EB curable coatings with low surface energy providing anti-stain and easy-to-clean properties. Additionally EBECRYL® 1365 can be used as a processing agent in matt and excimer curable formulations, facilitating a uniform film creation which in turn significantly increases the process robustness.

WANNATE® TT-350B is an aromatic polyisocyanate based on toluene diisocyanate. It is a colorless or pale yellow liquid with a solvent-like odor with approx. 50 % in butyl acetate.

VALIO EILA™ PRO LACTOSE FREE SKIMMED MILK POWDER is produced by spray drying pasteurised skimmed cow's milk of Finnish origin, from which lactose is partially removed by filtration and the remaining lactose is enzymatically hydrolysed to glucose and galactose. The product can be widely used in the food industry just like standard skimmed milk powder, provided that the higher protein content and caramelising tendency are taken into account.

MACROLEX® Red 5B FG is a dye used in plastics and elastomers for household goods and toys.

Esterex™ P61 is a API category Group V fluids. Esterex™ P61 has excellent low temperature properties, good lubricating properties, and low volatilities. Esterex™ P61 can be used as sole basestocks or blendstocks with other synthetic fluids in many automotive and industrial lubricant applications. Esterex™ P61 is ideal for use in air compressor applications, where low viscosity indices are acceptable and low cost, clean operation is desirable.