Products

AEROSIL® R 9200 is a structure modified, hydrophobicfumed silica.

ACRYSOL™ RM-2020 E is a solvent-free, non-ionic, urethane associative thickener offering very versatile means of formulating paints with an optimal film build and high shear viscosity. It is specifically designed for applications where a low odour or low VOC is required and specific environmental requirements are needed.

D.E.R.® 3213 functions as a binder and resin in CASE ingredients.

POLYGLYKOL D 21/150 is used in metalworking fluids within the fluids and lubricants market. It functions as a humectant and solvent in case ingredients, a lubricating agent in fluids and lubricants, a defoamer in food ingredients, and a lubricant in industrial additives.

EBECRYL® 3415 is a modified bisphenol A epoxy acrylate diluted with 40% 1, 6-hexanediol diacrylate (HDDA). This acrylated epoxy was developed for ultraviolet light (UV) curable screen printing, and exhibits excellent reactivity and good adhesion to various non-porous substrates. EBECRYL® 3415 meets all regulatory requirements and is no longer subject to the Significant New Use Rule (SNUR).

General Catalyst GC-008 is a kind of indoor and outdoor general type catalyst, it is self-crosslinking, can improve the adhesion of the film, does not affect the flow and gloss, has the effect of anti-yellowing property. It can completely improve the mechanical properties of the film when cures at 160 degrees to 200 degrees. It can be used as a curing accelerator for epoxy powder coating, epoxy/polyester powder coating and pure polyester /TGIC powder coating to improve curing effect, or as an internal catalyst containing carboxyl polyester resins to reduce curing temperature or shorten curing time. In indoor and outdoor system, curing condition can achieve 160 degrees /15-20 minutes, 170 degrees /10-15 minutes, 200 degrees /3-5 minutes , flow and mechanical properties are good.GC-008 could completely replace imidazoles, diphenylimidazoline and other catalysts which are easy to get yellowing and affect the leveling and storage stability, General Catalyst GC-008 is the upgrading product of them.

CRAYVALLAC® SUPER is a high performance, micronised amide wax rheology modifier suitable for a wide range of solvent-based, high-solids and solvent-free applications. CRAYVALLAC® SUPER overcomes those difficulties which exist with hydrogenated castor oil based rheology modifiers e.g. seeding and false-body. Consequently, coatings formulated using CRAYVALLAC® SUPER exhibit an enhanced performance such as controlled flow behavior, ease of application and excellent sag resistanceIts smooth viscosity recovery will help to achieve high film thickness without compromising a good levelling.

Bleumina® 216 is a series of Medium/High Color Furnace (MCF/HCF) blacks that provide excellent esthetics, along with high durability, in the final product. With very low particle size and a balance of structure, it exhibits good UV protection, high jetness, and gloss.

D.E.H.® 24 Epoxy Curing Agent is an economical liquid aliphatic polyamine hardener, triethylenetetraamine (TETA), that offers a short pot-life and cures in minutes with standard unmodified liquid epoxy resins. Similar to D.E.H.® 20 Epoxy Curing Agent, it provides lower vapor hazard to workers due to its higher boiling point. D.E.H.® 24 Epoxy Curing Agent is used for maintenance paints, the manufacture of epoxy-amine adducts, in adhesives, and civil engineering applications. It is also used as an accelerator for polyamide curing agents. In electrical applications, D.E.H.® 24 Epoxy Curing Agent is used for casting, potting and encapsulation.

WANNATE® HB-100 is an aliphatic biuret polyisocyanate based on hexamethylene diisocyanate (HDI) and dissolved in of 25% n-butyl acetate, colorless to slightly yellowish clear liquid.

BONDERITE® S-FN GP 1904 is a dispersion of PTFE and graphite in a thermosetting binder designed to be applied by spray, brush, or dip. BONDERITE® S-FN GP 1904 produces a low friction coating with excellent resistance to corrosion and solvents. The wide range of cure temperatures 149 to 260°C allows BONDERITE® S-FN GP 1904 to be used on wood, rubber and many plastics and on engineering metals. BONDERITE® S-FN GP 1904 is a one-package product and is not affected by low temperature storage conditions.

Naugalube® 438 is an antioxidant used in fluids and lubricants, compatible with mineral oils and synthetic base stocks. It is applied in aerospace fluids and lubricants, appliances and electronics, automotive fluids and lubricants, cold chain and insulation, and industrial oils and fluids, including gear oils, hydraulic fluids, and turbine and compressor oils.