Products

Additin® RC 2415 is a chemical blend used in metalworking fluids, including drawing oils, honing oils, lapping oil, rolling oils, and other metalworking fluids. It is mineral oil-free and offers extreme pressure performance with a low odor. The product functions as an extreme pressure additive.

Durad® 48 is a trialkyl phosphate anti-wear and extreme pressure additive for industrial oils. Neutral trialkyl phosphates significantly improve the anti-wear/extreme pressure properties of mineral and synthetic oils. However, unlike triaryl phosphates, they contain no phenolic species and may therefore be preferred for use in applications where there is concern about the potential release of the oil into the environment.

AP 8016 is a unique epoxy reactive diluents for epoxy- amine systems derived from Card phenol. With mono epoxy group per mole, it reduces excessive cross linking of the system and with side chain, imparts flexibility to paint films.

CANNASORB CB ACTIVE is a water-soluble biopolymer produced withGRAS-certified cannabidiol (CBD) as the starting material and polymer backbone.

Polyfill 405SM is a alumina trihydrate and leading flame retardant and smoke suppressant product used in a wide range of industrial applications.

VANCRYL® 68 S is an aqueous solution of VANCRYL® 68 acrylic resin, with ammonia used to affect the solution. VANCRYL® 68 S provides outstanding pigment wetting along with the viscosity stability needed for aqueous gravure and flexographic inks. The transfer properties and hold-out characteristics of inks prepared with this resin solution are excellent. In coatings, VANCRYL® 68 S provides high gloss, scuff resistance, and hardness. VANCRYL® 68 S is compatible with most acrylic vehicles and other vehicles such as maleic resins. VANCRYL® 68 S is effective as a protective colloid in the production of styrene-acrylic copolymer emulsions.

WWT379599 Cobalt Blue provides liquid colorants that are low in viscosity, high in color strength, and maintain excellent stability. Possible applications for the WWT379599 Cobalt Blue line include but are not limited to solvent-borne, moisture cure, and two component adhesive and caulk systems, industrial and architectural coatings, dip molding, cast urethanes, cast acrylic, plastisol coated fabrics, and calendered films. The WWT379599 Cobalt Blue is orthophthalate-free.

Additin® M 49.004 is a Light Color, Low Odor oxidized paraffin wax. It is effective at replacing natural fats, oils or fatty acids while providing better biostability. It is an excellent source of lubricity and corrosion protection for cutting and machining fluids, as well as drawing and stamping compounds. When used as a film former additin M49.004 leaves a dry non-discernable film.

COMFORTSIL CATA 2812 A1 is a catalyst from the chemical mixtures and blends family. It functions as a catalyst in CASE ingredients.

SURFYNOL® 485 W is a low-viscosity substrate wetting agent for water borne coatings and inks with high solubility in aqueous systems. SURFYNOL® 485 W can also be used for its stabilization and emulsification properties

Baeropan® MC 90602 KA/1 is a Ca/Zn Solid Stabilizer.

AEROSIL® R 974 W Coating is a hydrophobic fumed silica after-treated with DDS (Dimethyldichlorosilane) based on a hydrophilic fumed silica with a specific surface area of 200 m²/g. The product thickening efficiency of AEROSIL® R 974 W Coating ex RHE is consistent with the Waterford-produced AEROSIL® R 974. This profile is different than the thickening profile of standard RHE quality.