Products

AP5551 is medium viscosity, polyamide adduct hardener for epoxy resins based lacquers and coatings.

ASPECT® 15 is a mid-range talc product line specifically engineered for under-the-hood use in TPO applications when a natural grade is not needed.

HIKOTACK® P-901 is pale yellow thermoplastic resin obtained from polymerizing unsaturated aromatic olefins and diolefins derived from the process of thermal cracking of naphtha. The major usages is tackifier for Ethylene Vinyl Acetate copolymer (EVA) based hot melt adhesive (HMA). HIKOTACK® P-901 shows very good compatibility with numerous polymers as well as EVA, and provides good solubility with various solvents. In addition, this grade can be used as rubber compounding agent for tires, tubes, rubber coated clothes.

CARPOL® GSP-370 is a glycerin/sucrose-initiated polyether polyol. The high functionality of the initiators yields a resultant polyol with a nominal functionality of seven and a typical hydroxyl number of 370. Due to this polyol’s high functionality, it is typically used in rigid foam and its applications. Blending this polyol with other polyether polyols allows for foam systems with high to lower degrees of crosslinking. In addition, CARPOL® GSP-370 is mildly catalytic, which enables the use of less catalyst while still providing the formulator with control over the system’s reactivity.

Focus Polysurf Semi Base 25 produces an excellent general purpose semi-synthetic fluid when diluted with water by the formulator. Focus Polysurf Semi Base 25 has exceptional wetting properties and is formulated with corrosion inhibitor and lubricity additives. It is designed to be diluted at a ratio of 30/40% base to 70/60% low hardness water. Focus Polysurf Semi Base 25 does not contain biocides, but it is compatible with most standard biocides. Depending on the biocide, a slight adjustment with oleic acid may be required.

Durastrength® 350 impact modifier is a high performance acrylic impact modifier that imparts superior impact properties to rigid vinyl products. It was designed to give the impact resistance necessary to pass critical impact test procedures, while maintaining the excellent weatherability, processability and flow properties of Durastrength® 200 impact modifier.

AEROSIL® R 976 S is a hydrophobic fumed silica aftertreated with DDS (Dimethyldichlorosilane).

CEAMFIBRE VG 91-779 is a dietary fibre ingredient produced from high quality citrus peel.

SURFYNOL® MD-20 is a very compatible molecular defoamer based on Gemini surfactant technology. Freeof siliconeand silica. Offers additional dynamic wetting properties.

ACEMATT® 790 is an untreated, medium particle sized precipitated silica. It is especially recommended for coil coatings, as well as general industrial coatings.

Agimid® 240 N120 is a plasticized, heat and light stabilized and impact modified product for extrusion. The main application is pneumatic tubes for industrial and automotive markets.

AEROSIL® E 2000 is a single-ingredient organosilicon compound, specifically silica dimethyl silylate. It is compatible with silicone elastomers and is commonly used in toner applications. This product is designed to enhance the performance of various formulations, particularly in ink and toner products.

AEROTEX® IBMA Monomer a homolog of N-methylolacrylamide (NMA), is the isobutyl ether of NMA. It contains a readily polymerizable vinyl group as well as a crosslinkable iso-butoxymethyl group.

Superior Graphite 5590 is a purified synthetic graphite manufactured using Superior Graphite’s proprietary electro-thermal purification technology. This continuous high-temperature process exposes the raw materials to extremely high temperatures, so that impurities including inorganic contaminants are evaporated. Superior Graphite 5590 is an ultrafine grade within this product line produced using Superior Graphite’s dedicated milling and screening technology. Main uses are wear reduction and increase in thermal conductivity for high demanding applications.