Products

SURFYNOL® 61 surfactant is a 100% active multifunctional surface active agent. Due to its volatile nature, SURFYNOL® 61 surfactant can evaporate from a system under use conditions and/or heating. Therefore, SURFYNOL® 61 surfactant is useful in applications where residual surface activity or contamination is undesirable, such as silicon wafer and glass cleaning. SURFYNOL® 61 surfactant can provide excellent wetting of polyethylene and polypropylene films. Upon evaporation, little to no surfactant remains to interfere with trapping or cause water sensitivity in printing inks. During the curing of silicones by the silane/alkene addition reaction, SURFYNOL® 61 surfactant can “block” platinum catalysts through complexation; this effect can be used to delay the curing reaction. However, the SURFYNOL® 61 surfactant typically flashes off upon heating to liberate the active catalyst and trigger the reaction.

EBECRYL® 221 is a hexafunctional aromatic urethane acrylate oligomer which provides very fast cure response when exposed to ultraviolet light (UV) or electron beam (EB). Cured films of EBECRYL® 221 exhibit high hardness and solvent resistance.

FORMASHIELD™ 12 is an aqueous all-acrylic emulsion polymer designed for use in premium, ultra-low VOC interior paints. Paints can be formulated with FORMASHIELD™ 12 Binder to actively and irreversibly remove formaldehyde from the ambient air in commercial or residential interior spaces, offering significant improvement in Indoor Air Quality.

TEGO® Wet 270 shows excellent anti-crater properties with flow promotion in waterborne, solvent borne, and radiation-curing coatings.

Dynasylan® SIVO 250 is a methacrylfunctional silane that can be used as adhesion promoter, surface modifier, co-monomer for polymer synthesis and crosslinker. Dynasylan® SIVO 250 is a clear, colorless liquid. It is soluble in alcohols, and aliphatic or aromatic hydrocarbons.

Dynasylan® VTEO is a bifunctional organosilane possessing a reactive vinyl group and a hydrolyzable inorganic triethoxysilyl group. The dual nature of its reactvity allows Dynasylan® VTEO to bind chemically to both inorganic materials (e.g. glass, metals, fillers) and organic polymers (e.g. thermosets, thermoplastics, elastomers), thus functioning as a crosslinking agent, adhesion promoter and/or surface modifier. Dynasylan® VTEO is a colorless, low­viscosity liquid with a typical aromatic odor.

POLYCO™ 4160 is a binder and resin used in architectural coatings, automotive OEM coatings, industrial coatings, and paints and coatings applications.

Additin® RC 4202 is a corrosion inhibitor designed for greases and rust preventive oils. It provides corrosion inhibition and is non-staining.

Europrene® SOL T 190 is a linear block copolymer obtained by anionic polymerisation. The polymer is based on styrene and isoprene, where bound styrene content is 16 % wt and diblock content is 25 %. A non staining, TNPP free antioxidant system is added during the production process.

Europrene® SOL THX 3300 is a linear block copolymer obtained by selective hydrogenation of styrene - butadiene-styrene block copolymers. The polymer is based on styrene and ethylene/butylene, with a polystyrene content of 30% by wt. A non-staining, TNPP free, special antioxidant system, is added during the production process. The polymer is grafted with maleic anhydride.

Clearstrength® 223 is a methylmethacrylate butadiene styrene (MBS) core-shell impact modifier designed to meet the most demanding impact performances in injection malding, extrusion and calendering opaque PVC applications as well as for ambient and low temperature toughness to engineering polymers. The low temperature impact resistance and easy processability of Clearstrength® 223 impact modifier has made it a leading impact modifier used in CPVC pipe and fittings, furniture films and indoor profiles for over 25 years. This additive also aimed at providing good impact to polycarbonate, polyesters and a variety of polycarbonate blends, in particular PC/ABS.

Silcolapse® 710 is a 100% active silicone antifoam and or defoamer. It offers excellent antifoam and defoaming properties in a wide variety of aqueous and non-aqueous applications including those with incidental food contact as well as food processing applications. The product effectively controls foam at concentrations as low as 10 ppm solids, even at elevated temperatures. Silcolapse® 710 gives good results at wide-ranging pH and provides a cost effective solution where foam is a problem.

Aluminium Paste EMR D8188 is a silica coated aluminium paste with methoxypropanol solvent

AIRASE® 5700 is a very compatible defoamer concentrate based on polyether siloxane technology. Contains fumed silica.