Products

H.B. Fuller® PD-8081-H is a binder and resin used in waterborne adhesives for adhesives and sealants markets.

Additin® RC 3038 is a chemical blend used in greases and metalworking fluids, including cutting oils, drawing oils, greases, punching oils, and shock absorber oils. It provides extreme pressure performance and wear protection, functioning as an anti-wear agent. The product is suitable for applications requiring enhanced wear protection and extreme pressure resistance.

Stabaxol® P 100 PASTILLES is a carbodiimide-based anti-hydrolysis agent used in plastics and elastomers.

CRAYVALLAC® PA4 WDA 12 is a pre-activated amide wax supplied in a mixture of mineral spirit (D60) and alcohols. Under paste form for post addition to solvent-based low polarity coating systems, it provides a very simple and direct mean of introducing shear-thinning rheology with thixotropic viscosity recovery to coating formulations. It is a softer version than CRAYVALLAC® PA3 WDA 20 with enhanced ease of incorporation. It is also a very cost efficient alternative to organoclays. The shear-thinning characteristic provides a very high viscosity under the low shear rates and a low viscosity at the much higher application shear rates. The net result is excellent control of sedimentation combined with ease of application. Immediately following application, the coating’s viscosity undergoes a time dependent recovery as the network re-establishes itself. This time dependence is known as thixotropy and enables the final coating to attain very good levelling.

WANNATE® HT-100 is a solvent free aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI), colorless to slightly yellowish clear liquid.

Solumer™ 851T is an ultra-low density ethylene-octene copolymer produced via NexleneTM technology. It has excellent flow characteristics and provides superior impact resistance with other polymers.

WWT882192 Medium Gray is a pigment used in adhesives and sealants, and architectural coatings. It is compatible with concrete substrates.

Polyfill 130A is a alumina trihydrate and leading flame retardant and smoke suppressant product used in a wide range of industrial applications.

AQUAPOL® PI-13000-31 Prepolymer is an aliphatic urethane, end-capped prepolymer con- taining un-reacted isophorone diisocyanate (IPDI). Aquapol PI-13000-31 prepolymer will gel up to five times its weight of water and can be used to form stable gels with water. In contrast, concentrations of Aquapol PI-13000-31 prepolymer above 50% will result in closed cell foam rather than a gel. Gels will lose water to the atmosphere and should be protected with an impermeable membrane. The speed of reaction can be increased or decreased by using warm or cold water respectively and by the concentration of the amine catalyst. Using cold water will reduce any tendency toward frothiness.

Additin® RC 3741 is an ashless anti-wear agent and extreme pressure additive with low viscosity and good oxidation stability. It is designed for metalworking fluids, including broaching oil, deep hole drilling oil, grinding oils, and honing oils.

Addocat® PP is a versatile catalyst for PUR applications, example coatings, rigid and flexible foam, cellular elastomers.

CARPOL® PGP-2816 is a propylene glycol-initiated polyether polyol. CARPOL® PGP-2816 has a functionality of two and an average molecular weight of 2800 Da. This diol is polymerized with propylene oxide and then capped with 16% ethylene oxide.

D.E.H.® 4044 Epoxy Curing Agent is a fast curing, modified cycloaliphatic polyamine based curing agent for epoxy resins.

CARPOL® GP-6305-55 Polyol is a glycerin-initiated polyether polyol. The resulting material has a functionality of three and an average molecular weight of 6300 Da. This triol is polymerized with propylene oxide and then capped with 5% ethylene oxide. The outcome is a polyol with enhanced reactivity. Main applications include C.A.S.E., however, CARPOL® GP-6305-55 Polyol may also be included as a component in other urethane products and formulations.