Visit palmerholland.com
All Categories
All Categories
Products
4890
Brands
341
Documents
10098
Technologies
Markets
Products
Palmer Holland, Inc.
Matching Product
Technologies
(12)
Show All 12 Categories
CASE
Industrial Additives & Materials
Plastics
Elastomers
Cosmetic Ingredients
Agrochemicals
Animal Feed & Nutrition
Base Chemicals & Intermediates
Composite Materials
Cleaning Ingredients
Pigments & Colorants
Ready-to-Use Products
CASE
Industrial Additives & Materials
Plastics
Elastomers
Cosmetic Ingredients
Agrochemicals
Animal Feed & Nutrition
Base Chemicals & Intermediates
Composite Materials
Cleaning Ingredients
Pigments & Colorants
Ready-to-Use Products
Markets
Labeling Claims
Physical Form
Country of Origin
Principal
All Filters
52 Products
found on Palmer Holland, Inc.
Relevance
Palmer Holland, Inc.
PKT SORB-IT® 3G G2-809 27X52 2K/PP
Principal:
Clariant Absorbents
RTU Product Type:
Desiccant
Features:
Good Moisture Adsorption
Chemical Family:
Silica
PKT SORB-IT® 3G G2-809 27X52 2K/PP is an absorbent used in industrial additives applications.
Palmer Holland, Inc.
Wayncorâ„¢ 205
Principal:
WPC Technologies
Chemical Family:
Silica
Features:
Corrosion Resistance, Cost-Effective, Excellent Dispersion Properties, Improved Adhesion, Reduced Film Blistering
Wayncorâ„¢ 205 is an anti corrosion pigment that utilizes a calcium ion exchange mechanism to inhibit the corrosion process. Its near neutral pH allows it to be used in a wide variety of formulas without a negative impact on paint stability. The fine Hegman grind (6.5 minimum) permits its use in thin film applications (4 - 10 microns) such as coil coatings and in more traditional industrial applications where the dry film thickness is higher. This fine Hegman value also allows the product to be high speed dispersed. The Wayncorâ„¢ 205 mechanism works well on both ferrous and non-ferrous substrates. Wayncorâ„¢ 205 can be used as the sole corrosion inhibitor or synergistically with other inhibitive technologies.
Palmer Holland, Inc.
Precipitated Silica
Principal:
Yantai Kebaida Environmental & Technical Materials Co., Ltd
Chemical Family:
Silica
Chemical Name:
Amorphous Silicon Dioxide
Labeling Claims:
Odor-free
Features:
Chemical Stability, Cost-Effective, Effective Penetration, Excellent Adsorption Capacity, Excellent Whiteness, Good Suspensibility, Improved Quality, Improves Adhesion
Physical Form:
Granules, Powder
Precipitated Silica is a general term for white powder X ray amorphous silica and silicate products. It mainly refers to Precipitated Silica, fumed silica and ultrafine silica gel, and also includes powdered synthetic aluminum silicate and calcium silicate. Silica is a porous material and its composition can be expressed by SiO2.nH2O, in which nH20 exists in the form of surface hydroxyl. Soluble in caustic soda and hydrofluoric acid, insoluble in water, solvents and acids (except hydrofluoric acid), high temperature resistant, nonflammable, tasteless, odorless, with good electrical insulation.
Palmer Holland, Inc.
AERODISP® W 7520
Principal:
Evonik Corporation Silicas
Chemical Family:
Silica
Labeling Claims:
Carbon-free, Sustainable
Features:
Excellent Scratch Resistance, Low Thickening Effect, Low Viscosity
Physical Form:
Dispersion, Suspension
AERODISP® W 7520 is a low viscosity, water-based dispersion of AEROSIL® fumed silica, with a slightly alkaline pH
Palmer Holland, Inc.
AEROSIL® 380 Silica
Principal:
Evonik Corporation Silicas
Chemical Name:
Silicon Dioxide
Chemical Family:
Silica
Labeling Claims:
Allergen-free, Odor-free
Features:
Anti-Settling, Corrosion Resistance, Good Thickening Properties, Hydrophilic, Improved Hardness, Improves Anti-Sagging Properties, Provides Thixotropy, Radiation Curable, Superior Dispersion, Transparent
Physical Form:
Dispersion, Powder
AEROSIL® 380 is a hydrophilicfumed silica with a specificsurfacearea of 380 m²/g.
Palmer Holland, Inc.
ACEMATT® HK 400
Principal:
Evonik Corporation Coating Additives
Chemical Family:
Silica
Labeling Claims:
Allergen-free, Odor-free
Features:
Enhanced Surface Smoothness, Low Sedimentation, Low Viscosity, Matting, Transparent
ACEMATT® HK 400 is an untreated, medium particle sized precipitated silica. It is especially recommended for pigmented systems.
Palmer Holland, Inc.
ACEMATT® OK 500
Principal:
Evonik Corporation Coating Additives
Chemical Family:
Silica
Labeling Claims:
Allergen-free, Not Listed In California Proposition 65
Features:
Enhanced Surface Smoothness, Excellent Sedimentation, Good Compatibility, Low Viscosity, Matting, Transparent
ACEMATT® OK 500 is a wax-treated, medium particle sized precipitated silica. By offering very high compatibility, it can be used in a large variety of coatings. It has been optimized to have a minimal impact on drying times.
Palmer Holland, Inc.
AERODISP® W 7622
Principal:
Evonik Corporation Silicas
Chemical Family:
Silica
Labeling Claims:
Not Listed In California Proposition 65
Features:
Low Thickening Effect, Low Viscosity
Physical Form:
Suspension
AERODISP® W 7622 is a low viscosity, water-based dispersion of aerosil fumed silica with a slightly alkaline pH
Palmer Holland, Inc.
ACEMATT® HK 450
Principal:
Evonik Corporation Coating Additives
Chemical Family:
Silica
Labeling Claims:
Allergen-free, Odor-free
Features:
High Efficiency, Low Sedimentation, Low Sheen, Low Viscosity, Matting, Transparent
ACEMATT® HK 450 is an untreated, coarse particle sized precipitated silica. It is especially recommended for coil coatings, as well as general industrial coatings.
Palmer Holland, Inc.
AEROSIL® R 711
Principal:
Evonik Corporation Silicas
Chemical Name:
2-Propenoic Acid, 2-Methyl-, 3-(Trimethoxysilyl)Propyl Ester
Chemical Family:
Esters, Silica
Labeling Claims:
Allergen-free, Not Listed In California Proposition 65, Odor-free
Features:
Excellent Scratch Resistance, Good Mechanical Properties, Good Rheological Properties, Good Scratch Resistance, Improved Hardness, Improved Mechanical Resistance, Improved Rheology, Mar Resistance
Physical Form:
Powder
AEROSIL® R 711 is a fumed silica aftertreated with a methacrylsilane.
Palmer Holland, Inc.
AEROSIL® R 805 Coating
Principal:
Evonik Corporation Coating Additives
Chemical Family:
Silica
Labeling Claims:
Allergen-free, Odor-free
Features:
Anti-Settling, Corrosion Resistance, Excellent Stabilization Properties, High Sagging Resistance, Hydrophobic, Improved Mechanical Resistance, Light Weight
Physical Form:
Powder
AEROSIL® R 805 Coating is a fumed silica after-treated with organosilane. It providesutmost transparency.
Palmer Holland, Inc.
ACEMATT® OK 390
Principal:
Evonik Corporation Coating Additives
Chemical Family:
Silica
Labeling Claims:
Allergen-free, GADSL Chemical-free, Not Listed In California Proposition 65, Sustainable
Physical Form:
Powder
Features:
Enhanced Surface Smoothness, Excellent Sedimentation, Good Compatibility, Low Viscosity, Matting, Medium Viscosity, Transparent
ACEMATT® OK 390 is a wax-treated, finer grade matting agent based on precipitated silica. Due toits high compatibility, it can be used in a large variety of coatings.
Palmer Holland, Inc.
ACEMATT® OK 412
Principal:
Evonik Corporation Coating Additives
Chemical Family:
Silica
Labeling Claims:
Allergen-free, Odor-free
Features:
Enhanced Surface Smoothness, Excellent Sedimentation, Low Viscosity, Matting, Transparent
ACEMATT® OK 412 is a wax-treated, medium particle sized precipitated silica. By offering very high compatibility, it can be used in a large variety of coatings.
Palmer Holland, Inc.
ACEMATT® HK 125
Principal:
Evonik Corporation Coating Additives
Chemical Family:
Silica
Labeling Claims:
Allergen-free, Odor-free
Features:
High Efficiency, Low Sedimentation, Low Sheen, Low Viscosity, Matting, Transparent
ACEMATT® HK 125 is an untreated, coarse particle sized precipitated silica with heterogeneous particle size distribution. It is recommended for decorative coatings.
Palmer Holland, Inc.
ACEMATT® TS 100
Principal:
Evonik Corporation Coating Additives
Chemical Family:
Silica
Labeling Claims:
Allergen-free, Odor-free, Sustainable
Features:
Chemical Resistance, Enhanced Surface Smoothness, Excellent Sedimentation, High Efficiency, Low Viscosity, Matting, Transparent
ACEMATT® TS 100 is an untreated thermal silica with outstanding properties. It provides very high efficiency and transparency. It can be used in a large variety of coatings.
Show
15
of 52 results
1
2
3
4
