Products

CARPOL® PES-295 is designed for use in rigid polyurethane and polyisocyanurate foam systems. With its aromatic composition, CARPOL® PES-295 exhibits heightened insulation and thermal stability leading to improved energy efficiency. CARPOL® PES-295 has both high functionality and aromatic content which yields a highly crosslinked foam and allows for lower flame retardant levels.

Castung™ 103 G-H is an un-bodied dehydrated castor oil (DCO) that can be used with pure and modified phenolic resins to impart alkali resistance for can linings, corrosion resistant coatings, traffic paints, ink vehicles and marine finishes. Castung™ 103 G-H is excellent for formulating alkyd and copolymer resins, where dehydrated castor oil is well known for its non-yellowing and outstanding color retention characteristics.

AP 1365 is an excellent light color and a low viscosity phenalkamine curing agent suitable for epoxy coating primarily for top coat application. The product has rapid cure and film properties at lower temperature and excellent adhesion on concrete, primers, and midcoats. This product is designed primarily for floor topcoat and self leveling applications.

ExxonMobil™ Data Center Immersion Fluid 3220 is based on low viscosity polyalphaolefins fluids featuring excellent low temperature properties, low volatility, and improved thermal stability. ExxonMobil™ Data Center Immersion Fluid 3220 is ideally suited for immersion applications in data centers.

VERSAL YELLOW 3R 01 is a pigment used in decorative paints and industrial coatings. It is compatible with plasticized polyvinyl chloride (PVC-P) and polyolefins, and is designed to enhance color in plastics, elastomers, and various coating applications.

Licowax® PE 520 fine grain is a medium-molecular weight, non-polar copolymer wax.

D.E.H.® 505 Epoxy Curing Agent is a modified aliphatic amine hardener used as a curing agent for epoxy resins.

AP 8406 DS 40 is a very high molecular weight bisphenol A based epoxy polymer dissolved in diacetone alcohol/aromatic 100.

NACOL 16-98 RSPO-MB is an intermediate used in chemical synthesis within chemical manufacturing, industrial, and textile manufacturing markets.

ExCal® CW 3050 is processed from a high purity stone, to exacting specifications. Strict quality control during manufacture results in a consistent product that is used in all phases of oil and gas exploration. ExCal® CW 3050 is suitable for use in drilling fluids and other applications.

SPECIAL Violet S4B-F 02 is a dye used in wood stains, fabric softeners, detergents, preservatives, and waterborne inks.

RHOPLEX® AC-2235M is a 100% acrylic binder designed for use in exterior flat and sheen latex housepaints. The polymer provides a high degree of adhesion and durability. Film build and flow and leveling, however, are not as good as with newer acrylic binders. RHOPLEX® AC-2235M Acrylic Emulsion Polymer is designed to provide the same properties and performance as RHOPLEX® AC-235 in paint formulations, but at a lower price. RHOPLEX® AC-2235M may be substituted on a pound- for-pound basis for RHOPLEX® AC-235. As with any raw material substitution, key properties, such as adhesion and color acceptance, should be evaluated.

PC 1644™ Defoamer is a 40 % solution of an acrylic polymer in a petroleum solvent. It was developed to offer improved defoaming performance versus PC- 1244 in non-aqueous organic fluids. PC 1644™ Defoamer is a general purpose defoamer which offers superior foam control at low use levels, generally 10 to 20 % lower use level versus PC-1244. PC 1644™ Defoamer is silicone-free and exhibits very low odor. PC-1644 defoamer applications include usage in gear oils, specialty lubricants, and shock absorber, hydraulic, turbine or transmission oils. Typical use levels of the solutions range from 50 - 500 ppm (20 - 200 ppm active polymer). The optimum level is dependent upon the nature of the oil and it is therefore necessary to run a concentration profile for each oil. The defoamer is most typically employed at 200 - 250 ppm of solution (80 - 100 ppm active polymer).

D.E.H.® 2720 Epoxy Curing Agent is a high viscosity, modified cycloaliphatic polyamine based curing agent for epoxy resins. It contains no benzyl alcohol and no alkyl phenol.

Toyal PCF 200AG is used in paints and coatings markets and functions as a pigment.