Products

RHOPLEX® 585 is a 100% acrylic binder designed for premium exterior performance in flat and satin Architectural Coatings. It is supplied at high solids for formulation flexibility and does not contain any APEO (alkyl phenol ethoxylate) surfactants. The low coalescent demand of RHOPLEX® 585 allows the formulator to meet the 50g/VOC regulations while still maintaining some freeze thaw stability. Due to its 100% acrylic composition, RHOPLEX® 585 offers good exterior durability.

PURMOL™ 4ST is a sodium (Na) type A zeolite with a pore size of approximately 4 Angstroms (0.4 nm). PURMOL™ 4ST is recommended for use with high quality coatings. In general, we recommend the addition of 2.5% - 5% Purmol powder to the polyol component. This must be stirred thoroughly for a minimum of two hours to allow the Purmol to adsorb all the water before addition of the isocyanate. With metal dust coatings we recommend the addition of 0.5% - 2% PURMOL™ 4ST powder.

H.B. Fuller® HM-1580 is a ready-to-use adhesive known for chemical resistance, oil and solvent resistance, good adhesion, medium open time, and excellent performance at both high and low temperatures.

MAINCOTE™ 36 Emulsion is an aqueous hydrophobic acrylic copolymer that can be used as an anti-corrosive primer for metal substrates. Primers based on MAINCOTE™ 36 Emulsion have excellent adhesion to most metal substrates, including carbon steel, aluminum, and galvanized steel. MAINCOTE™ 36 Emulsion also has excellent water resistance and good corrosion resistance making it a good primer choice for industrial maintenance, DIY metal primers, and is also suitable for shop applications on structural steel where adhesion, water, and corrosion resistance are key requirements.

Basic Zinc Chromate 233 is primarily used in two component acid wash primers used to protect steel, galvanized surfaces and aluminum where provides improved adhesion to the topcoat as well. Since it provides protection on various substrates as well. Typical use levels 3-7

Hybricor™ 204 is an organic/inorganic hybrid corrosion inhibitor pigment, a proven effective replacement for Cr⁶⁺ in aerospace primer applications on aluminum and other non-ferrous substrates. The fine particle size of Hybricor™ 204 (7 Hegman) permits it to be easily incorporated into a coating using a high speed disperser. It is effective in primers, DTM and thin film (20 micron) applications. It does not affect pot life of 2K systems.

RE:CHEMISTRY MOVE200 is a pure ester-based Solvent. 58% Biogenic Carbon (derived from agricultural waste) according to ASTM D6866-20. Readily biodegradable. Non-flammable, Non-combustible and Low volatile. Classified as Non-corrosive, Non-sensitizing and Non-toxic. Miscible in conventional organic solvents and water. Butyl Levulinate is a GRAS.

Hybricor™ 204S is a pigment grade hybrid corrosion inhibitor, effective in primer applications intended for cast and structural aluminum protection. It can easily be incorporated into the coating using a high speed disperser. Hybricor™ 204S has a particle size of 7 Hegman which permits its use in both primer and DTM applications.

RE:CHEMISTRY SOLVE100 is a pure ester-based Solvent.100% Biogenic Carbon according to ASTM D6866-20.Readily biodegradable. Non-flammable and Low volatile. Classified as Non-corrosive, Non-sensitising and Non-toxic. Miscible in conventional organic solvents and water. Ethyl Levulinate is a GRAS.

RE:CHEMISTRY CLEAN300 is a pure Ketal Ester-based Solvent.72% Biogenic Carbon according to ASTM D6866-20. Ultimately biodegradable. Non-flammable, Non-combustible and Low volatile (LVP-VOC). Classified as Non-irritant, Non-corrosive, Non-sensitizing and Non-toxic. Miscible in conventional organic solvents and water. Ethyl PG-Acetal Levulinate is a GRAS.

TEGO® AddBond LTW improves adhesion and flexibility of solvent borne coatings on steel, galvanized steel, aluminum, and plastics.

VPS SIVO 260 is a novel multifunctional siloxane adhesion promoter with aminofunctionalities that can be used for various applications. VPS SIVO 260 is mainly dedicated for use in adhesives and sealants to improve the adhesion of hybrid products (e.g. silylated polyurethanes, MS Polymers®) and RTV-silicones - especially to difficult to stick polycarbonate substrates. In addition, VPS SIVO 260 can lead to adequate adhesive cure and it imparts both additional flexibility and hydrophobicity.

TEGO® AddBond DS 1300 improves adhesion of water borne coatings on steel, galvanized steel, aluminum, and plastics.

TEGO® AddBond LTH improves adhesion of coatings on metal and plastic substrates. It does not soften the coating film and can be used for solvent borne, solvent-free, and radiation-curing coating systems.

SILIKOFTAL® HTL 3 is a methoxy-functional siliconepolyester resin