Products

EBECRYL® 8414 is a urethane acrylate developed for liquid energy curable thermoforming inks. Flexographic inks made with EBECRYL® 8414 exhibit excellent thermoformability with draws up to 1" without cracking, blistering, separation or loss of adhesion. This medium viscosity oligomer has good pigment wetting capability and ink performance.

EBECRYL® 571 is a diluted polyester resin for narrow web shrink sleeve applications. It exhibits excellent adhesion, high flexibility, and superb shrink performance. For optimum performance EBECRYL 571 should be the dominant resin in the heat shrink ink formulation. EBECRYL 571 contains dipropyleneglycol diacrylate (DPGDA)(1) monomer.

EBECRYL® 3415 is a modified bisphenol A epoxy acrylate diluted with 40% 1, 6-hexanediol diacrylate (HDDA). This acrylated epoxy was developed for ultraviolet light (UV) curable screen printing, and exhibits excellent reactivity and good adhesion to various non-porous substrates. EBECRYL® 3415 meets all regulatory requirements and is no longer subject to the Significant New Use Rule (SNUR).

EBECRYL® 1300 is designed as the letdown oligomer for UV thermoformable ink applications, and should be used in conjunction with the pigment grind oligomer, EBECRYL® 8413. EBECRYL® 1300 exhibits good adhesion promoting properties. When used together with EBECRYL® 8413, non-blocking thermoformable inks can be developed. These thermoformable inks demonstrate scratch and temperature resistance, as well as excellent adhesion to a variety of plastic substrates without the necessity of corona discharge or flame pretreatment.

EBECRYL® 411 is a modified polyester resin for flexographic narrow web and rotary screen applications. It was developed for low viscosity inks and coatings with excellent adhesion to unprimed OPP films. EBECRYL® 411 is diluted with dipropyleneglycol diacrylate (DPGDA) monomer.

EBECRYL® 8413 is designed as the pigment grind oligomer for UV cured thermoformable ink applications and is designed for use in conjunction with the letdown oligomer, EBECRYL® 1300. EBECRYL® 8413 exhibits good milling properties and has very high elongation (550%). When used together with EBECRYL® 1300, non-blocking thermoformable inks can be developed. These thermoformable inks demonstrate scratch and temperature resistance, as well as excellent adhesion to a variety of plastic substrates without the necessity of corona discharge or flame pretreatment.