EBECRYL® 8413

EBECRYL® 8413 is characterized by
Excellent flexibility, 550% elongation at break

• Good milling properties
• High gloss
• Light color

UV cured thermoformable inks based on EBECRYL® 8413 and EBECRYL® 1300 are characterized by the following performance properties:

• Themoformability (In external tests, 1 to 8 draw ratios have been achieved on polycarbonate sheets)
• Tack-free state after cure, non-blocking systems
• Good temperature resistance
• Good scratch resistance
• Low shrinkage (1.2%)
• Suitable for first and second surface applications
• Excellent intercoat adhesion
• Good adhesion to a variety of untreated plastic substrates including:
  • Polycarbonate
  • Polystirene
  • PVC (polyvinylchloride)
  • Polyester
  • Acrylic
  • PET-G (glycol modified polyethyleneterephthalate)

The actual properties of the final cured products also depend on the selection of other formulation components such as reactive diluents, additives and photoinitiators.

Formulated products containing EBECRYL® 8413 may be applied via flat bed screen methods and are recommended for use in screen inks in the following three-dimensional markets.

• Displays / Signage / POP
• Vending machine panels
• Packaging
• Sporting goods
• Architectural
• Electronics
• Appliance Nameplates
• Housing
• Toys
• Novelty items

• Care should be taken not to expose the product to high temperature conditions, direct sunlight, ignition sources, oxidizing agents, alkalis or acids. This might cause uncontrollable polymerization of the product with the generation of heat.
• Storage and handling should be in stainless steel, amber glass, amber polyethylene or baked phenolic lined containers. Procedures that remove or displace oxygen from the material should be avoided. Do not store this material under an oxygen free atmosphere.
• Dry air is recommended to displace material removed from the container. Wash thoroughly after handling. Keep container tightly closed. Use with adequate ventilation.