Products

SURFYNOL® 104 BC is a multifunctional surfactant providing combined dynamic wetting and molecular defoaming in water borne coatings and inks.

RE:CHEMISTRY MOVE200 is a pure ester-based Solvent. 58% Biogenic Carbon (derived from agricultural waste) according to ASTM D6866-20. Readily biodegradable. Non-flammable, Non-combustible and Low volatile. Classified as Non-corrosive, Non-sensitizing and Non-toxic. Miscible in conventional organic solvents and water. Butyl Levulinate is a GRAS.

CRAYVALLAC® PA4 WDA 12 is a pre-activated amide wax supplied in a mixture of mineral spirit (D60) and alcohols. Under paste form for post addition to solvent-based low polarity coating systems, it provides a very simple and direct mean of introducing shear-thinning rheology with thixotropic viscosity recovery to coating formulations. It is a softer version than CRAYVALLAC® PA3 WDA 20 with enhanced ease of incorporation. It is also a very cost efficient alternative to organoclays. The shear-thinning characteristic provides a very high viscosity under the low shear rates and a low viscosity at the much higher application shear rates. The net result is excellent control of sedimentation combined with ease of application. Immediately following application, the coating’s viscosity undergoes a time dependent recovery as the network re-establishes itself. This time dependence is known as thixotropy and enables the final coating to attain very good levelling.

XIBOND® 120 is a reactive additive to improve the blend morphology of polymer blends. This additive is a random copolymer of styrene and maleic anhydride.

ELIX™ 250 G is a soft Flow SAN copolymer.

EBECRYL® 1360 is a silicone hexaacrylate that improves slip, substrate wetting and coating flow and leveling when used as an additive in formulations cured by ultraviolet light (UV) or electron beam (EB). Cured films containing EBECRYL® 1360 will exhibit a smooth, tack free surface, with good blocking resistance. Because of its acrylate functionality, the silicone cures into the polymeric backbone, thus eliminating the migration that free silicones often display in coatings. EBECRYL® 1360 is particularly effective in EB cured formulations.

Orgalloy® LE 6000 NAT is a polyamide alloy especially designed for cable sheathing and blown film extrusion. Orgalloy® EM 067 HSP is natural grade dedicated to extrusion offers excellent barrier properties and chemical resistance to hydrocarbons, alcohols and solvents.

Orgalloy® EM 067 HSP is a flexible polyamide designed to be used for refrigerant barrier layer in air conditioning rubber hose.

Orient Black® N774 is a low surface area, low structure, soft grade carbon black providing high resilience, good elasticity resistance and bending resistance.

Orgalloy® LT 5050 T6L NAT is a polyamide alloy especially designed for tube extrusion. This natural grade dedicated to extrusion offers good barrier properties and chemical resistance to oils and HFC gas, a high thermal resistance and flexibility.

Platamid® M 1657 is a standard thermoplastic co-polyamide hot melt adhesive available in pellet form. This very low melt viscosity, fast re- crystallizing grade is particularly suitable for manufacturing webs, nets, mono- and multi-filaments.

Orgalloy® RS 6000 NAT is a polyamide 6 alloy designed for injection molding. This natural grade offers an outstanding dimensional stability, chemical resistance to automotive fluids and is ideal for the realization of complex parts.

PLATAMID® HX 2592 T is a specialty thermoplastic co-polyamide hot melt adhesive available in pellet form. This low to medium melt viscosity grade is particularly suitable for manufacturing webs, nets, mono- and multi-filaments, and films by extrusion. PLATAMID® HX 2592 T offers a very good adhesion to various polar substrates (thermoplastics, thermosets, metal natural fibers, and more)

PEBAX® MV 1074 SP 01 resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide. Pebax® MV 1074 SP 01 resin is an inherently dissipative polymer and can be dry blended or compounded with an isolative polymer to lower the surface resistivity. This hydrophilic grade when extruded into either a thin film or laminated on to a substrate offers excellent permeability to moisture vapor while remaining waterproof. This SP grade has been developed to be heat and UV resistant.

PLATAMID® M 1276 Pellets is a thermoplastic co-polyamide hot melt adhesive available in pellet form. This medium melt viscosity grade is particularly suitable for manufacturing webs, nets, mono- and multi-filaments, and films by extrusion. PLATAMID® M 1276 Pellets offers a very good adhesion to various polar substrates like thermoplastics, thermosets, metal natural fibers, etc.