Products

Exolit® OP 1240 is a flame retardant based on an organic aluminum phosphinate which is a thermally stable white solid without any hazard classification or labeling. It can be easily compounded into polyesters and subsequently processed again to manufacture flame retarded parts used in consumer or industrial products.

Bluesil™ FLD 604 V50 is a 100% dimethyl polysiloxane fluid, which has been processed and controlled to meet electrical specifications. Bluesil™ FLD 604 V 50 exhibits excellent dielectric, thermal and chemical properties which makes it an environmentally-safe replacement for PCB- containing fluids as the dielectric coolant for immersed transformers

Foral® 85 is the glycerol ester of hydrogenated wood rosin. It is an exceptionally pale thermoplastic resin that has outstanding resistance to oxidation and to diskoloration caused by heat and aging. Foral® 85 resin can be used as a tackifier resin in various types of adhesives, and in protective and barrier type coatings that require an exceptional degree of color retention and oxidation resistance. It is particularly effective in tackifying acrylic PSA formulations.

Ceridust® 6050 M is a micronized metallocene-based polypropylene wax.

Hostanox® O 310 micro pills effectively combines extraordinary high extraction resistance and hydrolytic stability with good stabilization performance. Therefore Hostanox® O 310 is predestined for the stabilization of polymer articles requiring high level of stability even after an exposition to extractive media (e.g. water, solvents, etc.)

Exolit® AP 750 is a non-halogenated flame retardant based on ammonium polyphosphate as main component, which develops its effectiveness through phosphorus/nitrogen synergism. In contrast to similar competitive material, it shows high processing stability. Exolit® AP 750 differs in its mode of action from non phosphorus-based flame retardants (e. g. brominated, chlorinated or mineral FRs like ATH) by achieving its effect through intumescence. Material containing Exolit® AP 750 will foam on exposure to flame. The carbon-rich foam layer so formed will protect the polymer and in many cases the substrate below through its heat insulating effect, reduces further oxygen access and prevents dripping in case of a thermoplastic based formulation. Beyond the primary effects on fire behavior such as reduction of flame propagation rate, rate of heat release, dripping behavior, residual lengths of test specimens after flame tests etc., positive secondary fire effects such as low smoke density, no release of corrosive off-gasses, lower formation of toxic smoke gasses are of great interest.

Licolub® WE 40 P is ester of montanic acids with multifunctional alcohols

Licocene® PP MA 7452 granules are used in hot melt adhesives. They feature good wetting, improved cohesion, and enhanced adhesion, along with good mechanical properties and reduced moisture uptake. It functions as an adhesion promoter, coupling agent, and wetting agent in both CASE ingredients and plastics & elastomers.

Hostavin® 3212 liq is a 100% liquid blend of an oxalanilide based UV absorber with a low molecular weight HALS.

Ceridust® 3910 is a micronized amide wax.

Ceridust® 8020 TP is a highly modified copolymer wax.

Ceridust® 3610 is a micronized high density poly ethy lene wax.

Exolit® OP 950 is a white granular powder based on an organic phosphinate. The product is not hygroscopic and slightly soluble both in water and in common organic solvents. It melts at 200°C.

Ceridust® 3620 is a micronized polyethylene wax.

Exolit® OP 935 is a white, fine-grained powder based on an organic phosphinate. The product is not hygroscopic and it is insoluble in water and common organic solvents like acetone, dichloromethane, MEK, toluene. Exolit OP 935 can easily be dispersed in solvents like acetone or MEK.