Products

3M™ Ceramic Microspheres W-210 is a unique, semi-transparent, white-colored, fine particle size, high-strength microspheres. 3M™ Ceramic Microspheres W-210 is typically used to reduce VOC levels; increase filler loadings; improve hardness; and add burnish, scrub and abrasion resistance to a variety of coating formulations. Due to the ceramic chemistry of 3M™ Ceramic Microspheres W-210, it is also UV transparent down to 250 nm and have utility in radiation-curable and thin-film powder coatings.

3M™ Ceramic Microspheres W-610 are unique, semi-transparent, white-colored, fine particle size, high-strength microspheres. These products are typically used to reduce VOC levels, increase filler loadings, improve hardness and add burnish, scrub and abrasion resistance to a variety of coating formulations. Due to the ceramic chemistry of these products, they are also UV transparent down to 250 nm and have utility in radiation-curable and thin-film powder coatings.

Additin® RC 8213 is an ashless extreme pressure additive and metal deactivator designed for sulfur-rich refinery streams. It is compatible with copper, non-ferrous metals, and other metals. Suitable for compressor oils, gear oils, greases, hydraulic fluids, metalworking fluids, turbine oils, and crude oils.

Synesstic™ 5 represent a unique class of API Group V category fluids. Synesstic™ 5 offers improved hydrolytic, thermal and oxidative stability versus other Group V fluids. Synesstic™ 5 is particularly suited for use as a blendstocks in synthetic lubricant applications that require high stability under extreme operating conditions.

Additin® RC 2526 is a mineral oil-free chemical blend with a sulfur concentration of 15% (w/w), designed for use in metalworking fluids. It offers high performance, high sulfurization, low odor, and medium viscosity. The product functions as an extreme pressure additive in metalworking fluids.

Bayferrox® 115 M is a single-ingredient inorganic pigment, Pigment Red 101. It provides strong color performance in various applications.

PC 1644™ Defoamer is a 40 % solution of an acrylic polymer in a petroleum solvent. It was developed to offer improved defoaming performance versus PC- 1244 in non-aqueous organic fluids. PC 1644™ Defoamer is a general purpose defoamer which offers superior foam control at low use levels, generally 10 to 20 % lower use level versus PC-1244. PC 1644™ Defoamer is silicone-free and exhibits very low odor. PC-1644 defoamer applications include usage in gear oils, specialty lubricants, and shock absorber, hydraulic, turbine or transmission oils. Typical use levels of the solutions range from 50 - 500 ppm (20 - 200 ppm active polymer). The optimum level is dependent upon the nature of the oil and it is therefore necessary to run a concentration profile for each oil. The defoamer is most typically employed at 200 - 250 ppm of solution (80 - 100 ppm active polymer).

PC-1344™ Defoamer is a highly viscous organic polymer. It enhances air release properties and prevents foam formation in acidic or neutral organic fluids at temperatures up to 400 °F. It also performs in some alkaline systems. It has demonstrated an ability to retain its defoaming capacity over extended periods of time. It works without materially affecting the surface tension of the media. PC-1344™ Defoamer contains no silicone. PC-1344 Defoamer applications include usage in gear oils, specialty lubricants, and hydraulic, turbine, or transmission oils. Typical use levels range from 20 ppm to 2000 ppm (0.2 %).

Additin® RC 3661 is a liquid corrosion inhibitor and extreme pressure additive designed for use in metalworking fluids, hydraulic oils, and compressor oils. It offers excellent oxidation stability, wear protection, and corrosion resistance. This product is widely used in industrial applications like metalworking, engine oils, and lubricants. Its features include high load-carrying capacity and improved fluid life.