Products

Kane Ace® MX-710 is a 40% concentrate of coreshell rubber (CSR) particles – a toughening agent – in 1000 Mw polypropylene glycol. Kane Ace® MX-710 is a stable dispersion CSR particles do not separate under normal handling, formulating and curing conditions and it can be mixed or diluted with most polyols and solvents.

SURFYNOL® 355 is a substrate wetting agent with global food contact compliances. It is suitablefor waterborne coatings and inks.

Synthomer M60 is a medium high molecular weight, solid polyvinyl acetate. It is designed for use in solvent-based coatings, inks, and adhesives or melt extrusion systems such as automotive sound damping foils.

SUKOREZ® SU-130 is a waterwhite thermoplasic resin obtained from polymerization and hydrogenation of cyclic ingredients. The major usages are tackifier for hot melt adhesive(HMA), hot melt pressure sensitivi adhesive(HMPSA) and solvent based pressure sensitive adhesive(SBPSA), because of its good heat resistance and good compatibility with base polymers such as ethylene vinyl acetate(EVA), styrene block copolymer(SBC).

D.E.R.® 325 liquid epoxy resin is a mono-functional reactive diluent modified reaction product of epichlorohydrin with Bisphenol-A.

PARALOID™ A-21 100% Resin imparts excellent intercoat adhesion, hardness, and outdoor durability. It has the same composition and characteristics as the solution grade, while providing wider formulating latitude.

Hostavin® VSU powder is an Oxalanilide UV absorber, a low volatile polar substance with good heat stability. It is resistant to discoloration with metal ions, e.g. from polymerization catalyst residues, fillers or from contact surfaces. Hostavin® VSU powder absorbs the UV light especially in the UV-B range, and is therefore a stabilizer of choice for combinations with optical brighteners and for UV curing systems.

HP7622 is a high solids, water-reducible polyester dissolved in glycol ether EB (butoxyethanol). It is soluble in water after neutralization with amine. Stability and solubility in water may be improved with additional glycol ether EB or 2-butanol. It is a very linear polymer and provides excellent flexibility when combined with amino resins in baking finishes.

AP 5689 is low viscosity, modified aliphatic amine adduct hardener for epoxy resins based lacquers coatings.

FORTEGRA® 401 is a specialty polyoxypropylene diamine modified liquid epoxy resin. FORTEGRA® 401 is designed for the use of enhancing the toughness and flexibility for epoxy systems, mainly used in epoxy adhesives and coatings products. With improved toughness and flexibility, the adhesives products can achieve better drop resistance and impact peeling resistance, as well as perform well on aging tests. While for the applications in coatings, it brings the benefits of improved adhesion and impact resistance. A wide variety of curing agents are available to cure this resin at ambient conditions. Most frequently used curing agents are aliphatic polyamines, polyamides and modified versions of these. Elevated temperature cure is necessary and post-cure required to develop full end properties if anhydride or catalytic curing agents are employed.

MAINCOTE™ HG-86 is a binder and resin used in primers, traffic paints, and waterborne paints. It features early rain resistance, easy application, excellent glass bead retention, fast drying, high durability, low VOC, night visibility, and prolongs wear life.

TEGO® Phobe 1409 is an amino-siloxane emulsion for the hydrophobization of coating formulations. It reduces the water uptake and generates a water-beading effect, even in paints with high pH value.

EBECRYL® 9103 is used in radiation-curable coatings. It functions as a monomer and oligomer in CASE ingredients.

Thetawet™ FS-8150 is a nonionic surfactant used in caulks, home care applications such as bottle wash, degreasers, floor cleaners, and household cleaners, as well as in industrial and institutional cleaning including bottle wash, degreasers, and industrial cleaners.