Products

B 4010 is a liquid Bio-plasticizer for PVC.

CYMEL® NF 3041 is a formaldehyde-free, partially n-butylated crosslinking agent supplied in n-butanol. It was designed primarily for use in 2 pack ambient cure solvent-borne conversion varnishes for industrial wood. Systems containing CYMEL® NF 3041 exhibit superior catalyzed pot life relative to typical urea-based conversion varnishes and require significantly less catalyst to effect cure. The resulting coatings have excellent appearance, early hardness, resistance properties, and hot/cold cycle flexibility.

D.E.H.® 589 cycloaliphatic amine hardener is used as a curing agent for epoxy resins. It is used where an optimum balance between working time and cure speed is required. It results in a blush-free product and has good water spot resistance and excellent chemical resistance. It offers good low temperature cure and can also be used as an accelerator for other hardeners in coatings and civil engineering applications.

D.E.N.® 438-MK75 is a solution of a semi-solid reaction product of epichlorohydrin and phenol-formaldehyde novolac in methyl isobutyl ketone.

AP 1062 is a polyamide-based curing agent derived from cashew nutshell liquid, polymerized with ethylenediamine and formaldehyde. This product is designed to act as a curing agent in various resin systems, particularly in the CASE (Coatings, Adhesives, Sealants, and Elastomers) industry. It is a single ingredient formulation that promotes the curing process in different applications.

CARPOL® PES-295 is designed for use in rigid polyurethane and polyisocyanurate foam systems. With its aromatic composition, CARPOL® PES-295 exhibits heightened insulation and thermal stability leading to improved energy efficiency. CARPOL® PES-295 has both high functionality and aromatic content which yields a highly crosslinked foam and allows for lower flame retardant levels.

Castung™ 103 G-H is an un-bodied dehydrated castor oil (DCO) that can be used with pure and modified phenolic resins to impart alkali resistance for can linings, corrosion resistant coatings, traffic paints, ink vehicles and marine finishes. Castung™ 103 G-H is excellent for formulating alkyd and copolymer resins, where dehydrated castor oil is well known for its non-yellowing and outstanding color retention characteristics.

AP 1365 is an excellent light color and a low viscosity phenalkamine curing agent suitable for epoxy coating primarily for top coat application. The product has rapid cure and film properties at lower temperature and excellent adhesion on concrete, primers, and midcoats. This product is designed primarily for floor topcoat and self leveling applications.

ExxonMobil™ Data Center Immersion Fluid 3220 is based on low viscosity polyalphaolefins fluids featuring excellent low temperature properties, low volatility, and improved thermal stability. ExxonMobil™ Data Center Immersion Fluid 3220 is ideally suited for immersion applications in data centers.

D.E.H.® 505 Epoxy Curing Agent is a modified aliphatic amine hardener used as a curing agent for epoxy resins.

AP 8406 DS 40 is a very high molecular weight bisphenol A based epoxy polymer dissolved in diacetone alcohol/aromatic 100.

RHOPLEX® AC-2235M is a 100% acrylic binder designed for use in exterior flat and sheen latex housepaints. The polymer provides a high degree of adhesion and durability. Film build and flow and leveling, however, are not as good as with newer acrylic binders. RHOPLEX® AC-2235M Acrylic Emulsion Polymer is designed to provide the same properties and performance as RHOPLEX® AC-235 in paint formulations, but at a lower price. RHOPLEX® AC-2235M may be substituted on a pound- for-pound basis for RHOPLEX® AC-235. As with any raw material substitution, key properties, such as adhesion and color acceptance, should be evaluated.

PC 1644™ Defoamer is a 40 % solution of an acrylic polymer in a petroleum solvent. It was developed to offer improved defoaming performance versus PC- 1244 in non-aqueous organic fluids. PC 1644™ Defoamer is a general purpose defoamer which offers superior foam control at low use levels, generally 10 to 20 % lower use level versus PC-1244. PC 1644™ Defoamer is silicone-free and exhibits very low odor. PC-1644 defoamer applications include usage in gear oils, specialty lubricants, and shock absorber, hydraulic, turbine or transmission oils. Typical use levels of the solutions range from 50 - 500 ppm (20 - 200 ppm active polymer). The optimum level is dependent upon the nature of the oil and it is therefore necessary to run a concentration profile for each oil. The defoamer is most typically employed at 200 - 250 ppm of solution (80 - 100 ppm active polymer).

D.E.H.® 2720 Epoxy Curing Agent is a high viscosity, modified cycloaliphatic polyamine based curing agent for epoxy resins. It contains no benzyl alcohol and no alkyl phenol.

AP 1058 LT is a low viscosity, reactive, light colour Phenalkamine hardener for epoxy resins based lacquers and coatings.