Products

Castorcin™ 208 is a 100% solids castor oil based reactive diluent having good compatibility and wetting. This polyol is a tetrahydroxy ester, with three primary and one secondary hydroxyl groups, making it an attractive material for chemical reactions.

Dimethyl adipate functions as an intermediate in base chemicals.

Polycin® D-140 is a 100% solids, castor oil-based derivative designed for use as a polyol or reactive diluent in polyurethane systems. Polycin D-140, with its very low viscosity and secondary hydroxyl groups, will allow for the formulation of higher system solids with improved VOC reduction and longer pot-life. Polycin® D-140 will also impart the beneficial properties of castor oil derivatives, such as improved flow and levelling.

Flexricin® P-3 is an outstanding plasticizer for polyvinyl butyral, rosin, vinysol resin and cellulose acetate butyrate resins. It also functions as a general purpose plasticizer for both nitrocellulose and ethylcellulose resin systems, and as an internal reactive plasticizer for polyurethanes.

DRY #1 Castor Oil is a Technical Grade pure castor oil having a very low moisture content at 0.02% maximum. Also known as ricinus oil, it is a triglyceride of fatty acids which occurs in the seed of the castor plant, Ricinus communis. The low moisture content makes this product ideal for lubricant or polyurethane applications where low moisture is required.

Flexricin® 100 is a stabilized variant of Vertellus' P- 10 Acid having a shelf life of 24 months. Flexricin® 100, just as P-10 Acid, is a building block for modifying many performance properties of a broad range of industrial chemicals. These performance enhanced chemicals are then used in a variety of consumer products, including paints, adhesives, soaps and inks.

Pale 1000 Blown Castor Oil commonly known as blown oils have increasing viscosities resulting from oxidative and crosslink polymerization at the double bonds and hydroxyl groups. Oxidative polymerization of castor oil yields products with increased viscosities and decreasing solubility in aliphatic solvents, increasing compatibility with various resins and improved ability to wet and disperse pigments while imparting solvent and abrasion resistance to lacquer systems. The polymerized oils are used to plasticize a variety of resins in adhesive and sealant systems, inks and hot melts. The heavier viscosity polymerized oils are processing aids and plasticizers for rubber polymers, imparting oil and solvent resistance.

DB™ Oil is the highest grade of refined castor oil. It was developed for use in applications when a low acidity and moisture content are critical.

Polycin® GR-50 is a 100% solids, castor oil-based derivative designed for use as a primary polyol or reactive diluent in polyurethane sealants and adhesives systems. Polycin® GR-50 imparts low hardness and provides VOC reduction while offering the beneficial properties of castor oil derivatives, such as improved flow and levelling.

P-™10 Acid Low color castor oil fatty acids is castor oil fatty acids, derived from pure castor oil. P-™10 Acid Low color castor oil fatty acids is the building block for modifying many performance properties of a broad range of industrial chemicals. These performance enhanced chemicals are then used in a variety of consumer products, including paints, adhesives, soaps and inks.

Dry Filtered Neutral Oil is a refined grade of castor oil having a very low moisture level and a very low acid value making this product ideal for applications where a low acid value and low moisture content is required.

Extra Pale Castor Oil is used as an intermediate in base chemicals for lubricants.

Citroflex™ A-4 is a low molecular weight citric acid ester partially derived from bio-based raw materials.