Products

Protectosil® WS 602 is an aqueous emulsion for the water repellent treatment of mineral porous materials, especially facades. Essentially VOC free.

AEROSIL® R 976 S is a hydrophobic fumed silica aftertreated with DDS (Dimethyldichlorosilane).

Protectosil® WB CONCENTRATE is a clear, penetrating, breathable water repellent for use on brick, concrete masonry units and some natural stones. A 100% concentrated alkyltrialkoxysilane which is intended to be diluted with water and provides the high performance traditionally associated with alcohol carried systems. Prevents water and waterborne contaminants from entering the substrate and causing premature deterioration. Protectosil® WB CONCENTRATE is especially suited for imparling water repellency to substrates such as brick masonry and split-face block. By preventing water and waterborne contaminants from entering the substrate, Protectosil® WB CONCENTRATE reduces such problems as efflorescence, leaching, acid rain deterioration, scaling, dirt buildup, staining and corrosion of reinforcing steel. Treated surfaces are fully breathable because the natural moisture vapor transmission is not affected. This will eliminate problems caused by entrapped moisture, including blushing of the sealer and freeze-thaw damage to the masonry.

POLYGLYKOL P 41/12000 is used in leather and metal processing, heat transfer fluids, and metalworking fluids. It acts as a humectant, plasticizer, solvent, lubricating agent, and thickener. It also functions as a crosslinking agent in industrial additives and a mold release agent in plastics and elastomers. Compatible with polyesters and polyurethanes (PU).

Silcolapse® 495 is an anti-foaming agent classified as a chemical mixture and blend, used in industrial additives.

D.E.H.® 598B is used as a curing agent for epoxy resins for rapid-set and low temperatures cure systems with high gloss and high strength. It results in a non-blushing product and has good water spot resistance and excellent chemical resistance. It can also be used as an accelerator for other hardeners in coatings and civil engineering applications.

Protectosil® VPS WS 602 is an aqueous emulsion for the water repellent treatment of mineral porous materials. Essentially VOC free.

3M™ Glass Bubbles K20HS are high-strength additives for polymers made from a water-resistant and chemically stable soda-lime borosilicate glass. These hollow glass bubbles can be compounded with a variety of polymers to reduce the overall density of the composite. These composites can be incorporated into deep sea syntactic foam buoyancy modules to improve uplift properties of the system at minimal foam volumes. The high strength of K20HS glass bubbles can withstand both the high processing shear forces of polymer mixing and the pressure of seawater in many applications. 3M™ Glass Bubbles K20HS have isostatic crush strengths of 750 psi with a minimum of 90% survival.

Focus ChloroPar P-52 is a chlorinated paraffin based on a medium-chain (C14-16) paraffin. This product can function as an extreme pressure additive, flame retardant, and plasticizer. A small amount of stabilizer has been added to maintain product quality during transport and storage.

Licomont® BS 100 granules is a mixture of fatty acid derivatives for bitumen modification.

HIKOTACK® P-120S is pale yellow thermoplastic resin obtained from polymerizing unsaturated aromatic olefins and diolefins derived from the process of thermal cracking of naphtha. The major usages are rubber compounding agent for tires, tubes, rubber coated clothes. And this grade also can be used as tackifier for Ethylene Vinyl Acetate (EVA) based hot melt adhesive (HMA), water repellent agent, concrete, curing agent and binder for asphalt.

Bayferrox® 920 LO is a single-ingredient inorganic pigment, known as Iron Oxide Yellow or Ferric Oxide Yellow. It belongs to the iron oxides chemical family. The pigment is categorized as Pigment Yellow 42. It functions as a pigment in various applications, including plastics and elastomers.

D.E.H.® 613 is a Mannich base curing agent suitable curing above 0°C. It can be used with unmodified epoxy resins when good water and chemical resistance are required. It can also be used as an accelerator of other amines and polyamides.