Products

CRAYVALLAC® 60X is used in epoxies (EP) and vinyls. It is applied in anti-fouling coatings, chlorinated rubber coatings, primers, and solventborne coatings. The product provides anticaking, recoatability, and sag resistance.

CRAYVALLAC® A-72-A2-60-A is a binder used in CASE ingredients.

CRAYVALLAC® ANTISETTLE CVP is used in caulks, solventborne coatings, and greases. It features anti-settling, good leveling, high shear thinning, high thixotropy, recoatability, and sag resistance. The product functions as a rheology modifier in CASE ingredients.

CRAYVALLAC® EXTRA is a high performance, micronised amide wax rheology modifier suitable for high-solids and solvent-free applications with very high robustness. It is especially recommended in 2K epoxy primers for its high temperature tolerance.CRAYVALLAC® EXTRA overcomes those difficulties which exist with hydrogenated castor oil based rheology modifiers e.g. seeding and false-body and that were maximised when activation was performed at high temperatures.

CRAYVALLAC® LA-150 is a new pourable liquid rheology modifier supplied in Dimethylsulfoxide (DMSO) for post addition to solvent based systems.CRAYVALLAC® LA-150 is a post-addition rheology modifier composed of a modified urea dissolved in DMSO. When added to the final system, the DMSO is diluted and the modified urea crystallizes out as very fine fibres which build into a three-dimensional interacting network. It is this network that gives rise to the system’s shear thinning rheology and time dependent viscosity recovery. The result is excellent control of sedimentation combined with ease of application. Immediately following application, where low shear conditions again predominate, the system’s viscosity undergoes a time dependent recovery as the network re-establishes itself. This time dependency is known as thixotropy and enables the final system to attain very good levelling.

CRAYVALLAC® LA-250 is a modified urea dissolved in DMSO and is a pourable liquid rheology modifier for post addition to low polarity solvent based coatings. CRAYVALLAC® LA-250 should be added to the coating as a slow stream under low to medium shear conditions to ensure sufficient dispersion. Although efficient stirring is required to ensure homogeneity, elevated temperatures are not required for activation and the use of excessive shear should be avoided.

CRAYVALLAC® LA-350 is used in acrylics and alkyds for waterborne coatings. It features high shear thinning, high thixotropy, improved anti-sagging properties, recoatability, sag resistance, and viscosity control. The product functions as a rheology modifier in CASE ingredients.

CRAYVALLAC® LA-377 is a modified urea dissolved in DMSO. CRAYVALLAC® LA-377 is a pourable liquid rheology modifier for post addition to water-based coatings such as water-dilutable alkyds and acrylic emulsions. It was developed to ensure particular suitability for metal coating as its formula is lithium chloride-free. CRAYVALLAC® LA-377 should be added to the coating as a slow stream under low to medium shear conditions to ensure sufficient dispersion. Although efficient stirring is required to ensure homogeneity, elevated temperatures are not required for activation and the use of excessive shear should be avoided.

CRAYVALLAC® LV is a high performance, micronised amide wax rheology modifier suitable for very high-solids and solvent-free applications.CRAYVALLAC® LV overcomes those difficulties which exist with hydrogenated castor oil based rheology modifiers e.g. seeding and false-body. Consequently, coatings formulated using CRAYVALLAC® LV exhibit an enhanced performance such as controlled flow behavior, ease of application and excellent sag resistance. Its very high efficiency even when activated allows to reach very strong shear thinning that can result either in very high sag resistance or interresting balance between viscosity and sag resistance. Therefore CRAYVALLAC® LV is for instance highly recommended in the case of solvent free coatings with relatively low viscosity. It prevents the use of specific equipment for the application that are necessary with more viscous solvent-free coatings.

CRAYVALLAC® MT is used in solventborne coatings, as well as solventless and high solids coatings. It features anti-settling, high thixotropy, recoatability, and sag resistance. The product functions as a rheology modifier in CASE ingredients.

CRAYVALLAC® OPTIMA is a high performance, micronised amide wax rheology modifier suitable for high-solids and solvent-free applications recommended for its ease of activation and smooth viscosity recovery (good levelling). CRAYVALLAC® OPTIMA overcomes those difficulties which exist with hydrogenated castor oil based rheology modifiers e.g. seeding and false-body without the need of increasing the temperature of activation. Its smooth viscosity recovery will help to achieve high film thickness without compromising a good levelling.

CRAYVALLAC® PA3 S 12 is used in gelcoats and wood coatings. It is compatible with wood substrates and features anti-settling, cost-effectiveness, ease of incorporation, excellent filler and pigment suspension, good leveling, high thixotropy, recoatability, sag resistance, and transparency. The product functions as a rheology modifier in CASE ingredients.

CRAYVALLAC® PA3 BA 20 is a HAPs-free pre-activated amide wax supplied in a mixture of butyl acetate and alcohol. It is a rheology modifier in paste form with high efficiency (optimum sag resistance and viscosity).CRAYVALLAC® PA3 BA 20 is supplied in the form of crystalline fibres. In a coating system, these fibres form an interacting network. This network gives rise to the shear thinning rheology of the final coating. This shear thinning characteristic provides a very high viscosity under the low shear rates associated with sedimentation, and a low viscosity at the much higher application shear rates. The net result is excellent control of sedimentation combined with ease of application.

CRAYVALLAC® 60P is a solid powder wax consisting of fine particles of oxidized polyethylene recommended to prevent irreversible hard settling. The fine nature of this dispersion means that CRAYVALLAC® 60P is easily incorporated and activated in coating systems. It is mainly used in industrial and maintenance coatings where its primary function is to provide pigment suspension without any increase in the apparent viscosity. CRAYVALLAC® 60P can generally be used in most solvent-based formulations. Typical applications are epoxy primers, vinyl primers, anti-fouling paints, road marking paints and chlorinated rubber coatings.