Enhanced TDS
Identification & Functionality
- Chemical Family
- Fluids & Lubricants Functions
- Function
- Anti-Wear Agent, Corrosion Inhibitor, Antioxidant, Extreme Pressure Additive, Additive Packages
- Product Code
- MITM15045
- Technologies
- Product Families
Features & Benefits
- Fluids & Lubricants Features
- Labeling Claims
Applications & Uses
- Compatible Substrates & Surfaces
- Fluids & Lubricants End Use
- Fluids & Lubricants Type
- Markets
- Applications
- Product Applications
- Industrial gear oils
- Grease
- Additin® RC 9420 (M 94.005) is an ashless additive package with outstanding EP/AW behavior, oxidation and corrosion inhibiting properties.
Industrial gear oils based on Additin RC 9420 (M 94.005) exceed the following requirements:
- Timken OK load
- Oxidation stability
- Corrosion protection of steel and non-ferrous metals
- Wear protection capacity
- Load-carrying capacity (FZG test A 16.6/140°C)
- Typical treat rate to meet U.S. Steel 224 is 1.8% by weight.
- The recommended treatment level for use in Grease applications is approx. 2-4% by weight. Additin® RC 9420 (M 94.005) is optimized for the use in soap greases and complex soap greases.
- Additin® RC 9420 (M 94.005) does not contain lead, barium or antimony compounds.
- Due to the balanced combination of EP-, AW-, CI-,and AO-Additives in Additin® RC 9420 (M 94.005), there is no need to use additional performance additives for the production of high performance EP greases.
Properties
- Physical Form
- Soluble In
- Solubility Data
- Soluble in mineral oils and synthetic base oils.
- However, it is necessary to verify the solubility in the base oils used and the compatibility with other additives.
Packaging & Availability
- Packaging Type
Principal Information
- Group Principal Number
- S000008
- Principal
Storage & Handling
- Storage Conditions
- Store in a dry place at room temperature approx 24 months
Other
- Appearance
- Light brown liquid
- Color (SDS)
- Yellow
- Insoluble in (SDS)
- Water
- Item Number
- Temperature Control
- No
- USA/DOT UN Number
- UN3082
- Chemical Properties
Value Units Test Method / Conditions Nitrogen Content 1.0 - - Material Composition
Value Units Test Method / Conditions Mineral Oil Content 30.0 - Phosphorus Content 0.5 - Sulfur Content 23.0 - - Physical Properties
Value Units Test Method / Conditions Density 1.0 g/cm³ g/cm³ ASTM D1298 at 20°C Flash Point 150.0 °C °C Cleveland Open Cup Flash Point 150.0 °C °C ASTM D92 Viscosity 10.0 cSt cSt ASTM D445 at 40°C - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Density (SDS) 1.0 g/cm³ g/cm³ at 20°C Flash Point (SDS) min. 203.0 °F °F ISO 2719 Kinematic Viscosity (SDS) 10.29 - At 40°C - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 24.0 -