Agiflex® 300 B063

• Easy processability
• Very good mechanical properties
  • High tensile strength
  • High elasticity return & elastic properties
  • High flexibility fatigue resistance
  • High cold resistance
• Remarkable physical properties
  • Very low density
  • High moisture resistance
• High electric properties
• Very good chemical resistance
• High aging resistance

Extrusion Settings:

• Hopper zone 60 - 90°C
• Feeding zone 190 - 210°C
• Compression zone 210 - 230°C
• Metering zone 210 - 230°C
• Nozzle 200 - 210°C

Cooling Bath: 15 - 40°C

Injection Moulding Settings: 

• Mould temperature: 15 - 40°C
• Screw speed: 3 - 12 m/min
• Melt: 230°C

General: 

• All extrusion and injection machines suitable for PEBA can run the Agiflex® 300 B063.

Screw Types: 

• Screws with three zones (feeding, compression and metering zones) are recommended.
• Length: 18 D - 22 D
• Compression ratio: 2.2 – 2.8

Drying:

• Agiflex® 300 B063 is dried and packed with a moisture content of less than 0.10 %.
• If the packing has been damaged or left open for a long time (> 2 hours), then the material has to be dried.
• Polyamides are sensitive to oxidation at temperatures > 80°C in the oxygen atmosphere.
• To avoid yellowing of the granules (for natural color grades only), it is recommended to respect the following settings.

Drying Setting:

• Agiflex® 300 B063 has to be stored in dry, indoor and safe facilities.
• It is highly recommended to run granules having reached the workshop temperature to prevent from moisture condensing on cold granules.