Enhanced TDS
Identification & Functionality
- Blend
- No
- Chemical Family
- Function
- Resin
- Plastics & Elastomers Functions
- Polymer Name
- Product Code
- MITM16433
- Single Ingredient
- Yes
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Key Features
- Easy processability
- Very good mechanical properties
- High abrasion resistance
- Stable modulus with moist environment
- Remarkable physical resistance
- Lightest engineering polymers
- Low water absorption
- Very good chemical resistance
- High aging resistance
- Wide range of temperature use
Applications & Uses
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Markets
- Applications
Properties
- Physical Form
- Soluble In
Technical Details & Test Data
- Process Information
Basic Machine Settings:
- Feeding zone: 210 - 240°C
- Compression zone: 220 - 250°C
- Metering zone: 220 - 250°C
- Nozzle: 220 - 250°C
- Melt: 220 - 250°C
Mould Temperature: 10 - 40°C
- Machine Processing Information
General:
- All injection molding machines for polyamides can run the Agimid® 210B000.
Screw Types:
- Screws with three zones (feeding, compression and metering zones) are recommended.
- Length: 18 D - 22 D
- Material Processing Information
Drying:
- Agimid® 210B000 is dried and packed with a moisture content of less than 0.10 %.
- If the packing has been damaged or left open for a long time (>2 hours), then the material has to be dried.
- Polyamides are sensitive to oxidation at temperatures > 80°C in the oxygen atmosphere.
- To avoid yellowing of the granules (for natural color grades only), it is recommended to respect the following settings.
Drying Settings:
AIR DRYER VACUUM DRYER Temperature: max. 80°C Temperature: max. 80°C Time: 4 – 8 hours Time: 2 - 4 hours
Principal Information
- Group Principal Number
- S000003
- Principal
Storage & Handling
- Storage Conditions
- Agimid® 210B000 has to be stored in dry, indoor and safe facilities.
- It is highly recommended to run granules having reached the workshop temperature to prevent from moisture condensing on cold granules.
Other
- Color (SDS)
- Black
- Item Number
- Odor (SDS)
- Mild
- Other Hazards
- Acute exposure: Contact with the product, when handled at high temperatures, can cause serious burns.Inhalation: Inhalation of vapours due to thermal decomposition: Risk of irritation of respiratory system Toxic effects cannot be excludedDust inhalation: Risk of irritation of respiratory systemSkin contact: At high temperature, products of thermal decomposition can be irritating to skinEye contact: At high temperature, products of thermal decomposition can be irritating to eyesEnvironmental Effects:Inert polymer not biodegradable on the basis of its structurePhysical and chemical hazards:Thermal decomposition giving toxic and corrosive products. Decomposition products: See chapter 10Other:Results of PBT and vPvB assessment :Based on the available information, it is not possible to conclude on PBT and vPvB criteria according to REACH regulation, annex XIII.Endocrine disrupting properties - Health:Based on the available information, it is not possible to conclude on the endocrine disruptor potential.Endocrine disrupting properties - Environment :
- Protect from Freezing
- Yes
- Temperature Control
- Yes
- USA/DOT UN Number
- Not Applicable
- Electrical Properties
Value Units Test Method / Conditions Dielectric Strength 28.0 kV/mm kV/mm ASTM D149 as dry state - Mechanical Properties
Value Units Test Method / Conditions Charpy Impact Strength 5.0 - ISO 179 at +23°C, notched Charpy Impact Strength 6.0 - ISO 179 at -30°C, notched Elongation at Break min. 100.0 - at Break Tensile Modulus 1350.0 MPa MPa Tensile Modulus 46.0 MPa MPa ISO 527 break strength - Physical Properties
Value Units Test Method / Conditions Density 1.01 g/cm³ g/cm³ ISO 1183 at 23°C Melting Point 178.0 °C °C ISO 11357-1 Melting Point 178.0 °C °C ISO 11357-3 Storage Temperature 140.0 °F °F Water Absorption 0.7 % % ISO 62 at 23°C, 50% RH Water Absorption 1.4 % % at 23°C, 100% R.H - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Autoignition Temperature (SDS) 420.0-450.0 °C °C ASTM D1929 Boiling Point (SDS) 314.0 °C °C Decomposition Temperature (SDS) min. 350.0 °C °C Density (SDS) 1.02 g/cm³ g/cm³ Melting Point (SDS) 178.0-180.0 °C °C - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 0.0 - - Thermal Properties
Value Units Test Method / Conditions Heat Deflection Temperature 120.0 °C °C ISO 75 at 0.45 MPa Heat Deflection Temperature 50.0 °C °C ISO 75 at 1.85 MPa