Enhanced TDS
Identification & Functionality
- Additives Included
- Blend
- Yes
- Chemical Family
- Plastics & Elastomers Functions
- Polymer Name
- Product Code
- MITM16465
- Single Ingredient
- No
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Product Features and Benefits
- Easy processability
- Very good mechanical properties
- High abrasion resistance
- Stable modulus with moist Environment
- Remarkable physical resistance
- Lightest engineering polymers
- Low water absorption
- Very good chemical resistance
- High aging resistance
- Wide range of temperature use
Applications & Uses
- Plastics & Elastomers Processing Methods
- Processing Information
Machine General All injection molding machines for polyamides can run the Agimid® 210 N070 Screw Types Screws with three zones (feeding, compression and metering zones) are recommended. Length: 18D - 22D.
Material Drying 210 N070 is dried and packed with a moisture content of less than 0.10 %. If the packing has been damaged or left open for a long time (>2 hours), then the material has to be dried.
Polyamides are sensitive to oxidation at temperatures > 80°C in the oxygen atmosphere. To avoid yellowing of the granules (for natural color grades only), it is recommended to respect the following settings.
Drying Settings - Air Dryer
- Temperature: max. 80°C
- Time: 4 – 8 hours
- Vacuum Dryer
- Temperature: max. 80°C
- Time: 2 – 4 hours
Lubrication Agimid 210 N070 includes internal lubricants and release agents. Process (Recommended Basic Settings) Basic Machine Settings - Feeding zone 220 - 250°C
- Compression zone 220 - 250°C
- Metering zone 220 - 250°C
- Nozzle 220 - 250°C
- Melt 220 - 250°C
Mold Temperature 10 - 40°C - Air Dryer
Properties
- Physical Form
- Soluble In
Regulatory & Compliance
- Certifications & Compliance
Principal Information
- Group Principal Number
- S000003
- Principal
Storage & Handling
- Storage Conditions
Agimid® 210 N070 has to be stored in dry, indoor and safe facilities. It is highly recommended to run granules having reached the workshop temperature to prevent from moisture condensing on cold granules.
Other
- Appearance (SDS)
- Granules
- Color (SDS)
- Characteristic
- Flammable Nature (SDS)
- Non flammable
- Insoluble in (SDS)
- Water
- Item Number
- Odor (SDS)
- Mild
- Other Hazards
- If the product is handled or used at high temperature, contact with hot product or vapours may cause burns.At high concentrations, the vapours can be irritating to the respiratory system. Prolonged and repeated skincontact may cause reddening, irritation and dermatitis.
- USA/DOT UN Number
- Not Applicable
- Thermal Properties
Value Units Test Method / Conditions Heat Deflection Temperature 100.0 °C ISO 75 at 0.45 MPa Heat Deflection Temperature 45.0 °C ISO 75 at 1.85 MPa - Electrical Properties
Value Units Test Method / Conditions Dielectric Strength 24.0 kV/mm ASTM D149 as dry state - Mechanical Properties
Value Units Test Method / Conditions Charpy Impact Strength 8.0 kJ/m² ISO 179 at 23°C, notched Charpy Impact Strength 5.0 kJ/m² ISO 179 at -30°C, notched Charpy Impact Strength 50.0 kJ/m² ISO 179 at -30°C, unnotched Elongation at Break min. 100.0 % ISO 527 Tensile Modulus 650.0 MPa ISO 527 Tensile Strength at Break 40.0 MPa - Physical Properties
Value Units Test Method / Conditions Density 1.02 g/cm³ ISO 1183 at 23°C Melting Point 175.0 °C ISO 11357-1 Water Absorption 1.4 % Internal Method at 23°C, with 100% relative humidity Water Absorption 0.7 % Internal Method at 23°C, with 50% relative humidity - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Boiling Point (SDS) 314.0 °C Density (SDS) 1.02 g/L Melting Point (SDS) 168.0-178.0 °C